What does code P0713 mean?
automatic transmission temperature sensor
P0713 is an OBD-II generic code for a voltage problem with the automatic transmission temperature sensor. If this code is triggered, the TCM is reading voltage that is too high for the manufacturer’s parameters, meaning the automatic transmission fluid is too hot.
When to use the transmission fluid temperature code p0713?
Code P0713 is set when the PCM detects a high transmission fluid temperature sensor signal. This usually indicates an open circuit. An example of a transmission fluid temperature sensor: Related trans fluid temperature sensor “A” circuit codes: P0710 Transmission Fluid Temperature Sensor A Circuit Malfunction
How to check for a Hyundai p0713 code?
Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost of diagnosing the P0713 HYUNDAI code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city.
What is the transaxle code for a Hyundai Santa Fe?
– MIL on, with DTCs P0711, P0712 or P0713. This applies to 2010 and later Tucson, 2010 and later Santa Fe, 2011 and later Sonata GDI, Sonata HEV and Elantra, and 2012 and later Accent vehicles. NOTE: According to Hyundai, do not replace the transaxle for oil temperature sensor codes.
How long does it take to repair a p0713 Hyundai transmission?
Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost of diagnosing the P0713 HYUNDAI code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type.
What does the OBD2 code p0711 mean?
OBD2 Code P0711 Hyundai definition: The Automatic Transmission (A/T) fluid temperature sensor detects the A/T fluid temperature and sends a signal to the TCM.
Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost of diagnosing the P0713 HYUNDAI code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city.
Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost of diagnosing the P0713 HYUNDAI code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type.
What causes an error code on the transmission temperature sensor?
– Poor transmission fluid temperature sensor circuit connection – Faulty transmission fluid temperature sensor The Error code is generally activated on detection of the following conditions: The Engine Control Module (ECM) detected engine temperature change but recorded no transmission temp change