What are the daytime running lights on a Hyundai Tucson?
Daytime running lights, sometimes referred to as DRLs or DTRs, are lights that switch on automatically when your 2007 Hyundai Tucson is turned on and in drive. Since the daytime running lights are on whenever you are driving your Tucson, they are often the first bulbs to burn out.
What happens when you change the running light on a Tucson?
When you change the daytime running light on your Tucson, it is important not touch the glass part of the bulb with your fingers because the oil from your fingertips will cause that part of the bulb to burn hotter, which significantly shortens the life of the bulb.
When to change DRL bulbs on Hyundai Tucson?
These bulbs grow dimmer by over 20% over time, therefore we recommend changing both bulbs on your Tucson at the same time, even if only one bulb is burnt out – this will allow both DRL bulbs to have the same intensity and prevent the old DRL bulb from appearing dimmer than the new one.
How to troubleshoot a daytime running lights problem?
Use a Phillips screwdriver to remove the light assembly. Place all of the screws in a safe place so that none of them are lost. Tug on the electrical connector at the rear of the assembly. If the connector comes out or is loose, plug it securely into the rear of the assembly.
Is the brake light on my Hyundai Tucson bad?
2017 Hyundai Tucson, alerts driver that the rear left brake bulb is bad. But when the lamp is removed the bulb looks dark but the inside leads aren’t broken. But the bulb socket looks like burned.
Are there any problems with the Hyundai Tucson?
Hyundai Tucson owners have reported 227 problems related to electrical system (under the electrical system category). The most recently reported issues are listed below. Also please check out the statistics and reliability analysis of Hyundai Tucson based on all problems reported for the Tucson.
Use a Phillips screwdriver to remove the light assembly. Place all of the screws in a safe place so that none of them are lost. Tug on the electrical connector at the rear of the assembly. If the connector comes out or is loose, plug it securely into the rear of the assembly.
When do you need to replace your running lights?
They also increase your road vision during sunrise and sunset. If something goes wrong with your daytime running lights, they should be fixed immediately. Whether your vehicle uses high beams or has a separate light assembly for the daytime running lights, the troubleshooting process is the same.