How do you replace light bulbs on a Santa Fe?
Pull out any burnt-out bulbs from the underside of the Santa Fe’s instrument cluster. Install new bulbs by pushing them into the sockets until they click into place. Place the instrument cluster back into the Santa Fe. Reconnect its electrical connection and reinstall the four screws. Reattach the dash panel and reinstall its two screws.
How do you replace an instrument cluster on a Santa Fe?
Pull the cluster out of the vehicle. Pull out any burnt-out bulbs from the underside of the Santa Fe’s instrument cluster. Install new bulbs by pushing them into the sockets until they click into place. Place the instrument cluster back into the Santa Fe. Reconnect its electrical connection and reinstall the four screws.
Where are the dash lights on a Santa Fe?
The dash lights on the 2005 Hyundai Santa Fe are part of the instrument cluster located within the dashboard on the driver’s side. The lights on the instrument cluster, collectively known as the dash lights, allow the driver to see the cluster gauges in the dark.
What kind of light does a Santa Fe use?
The Santa Fe uses 194-type bulbs for its dash lights. Turn off the Santa Fe’s engine. Pull the hood-release lever and lift up the hood. Remove the negative-terminal off of the Santa Fe’s battery with a socket wrench. Remove the cluster fascia panel from around the instrument cluster.
Is the hyndai Santa Fe a good car?
Yes, the Hyundai Santa Fe is a good midsize SUV. It has just about everything most people look for in a vehicle: good gas mileage, a smooth ride, comfortable seats, and a quiet cabin.
How do you adjust headlights on a Hyundai Santa Fe?
Reverse your Sonata until your headlights line up above the tape. Turn on your headlights and prop open the hood. Look behind each headlight assembly for the two adjustment screws. Twist these with your fingers or a screwdriver to adjust the vertical and lateral aim of the headlights.
What is Hyundai Santa?
Hyundai Santa Fe . The Hyundai Santa Fe (Korean: 현대 싼타페) is a sport utility vehicle (SUV) produced by the South Korean manufacturer Hyundai since 2000.
How to replace instrument panel lights with LEDs?
Replace You Cars Instrument Panel Lights With LEDs. Introduction: Replace You Cars Instrument Panel Lights With LEDs. The bulbs behind my Tachometer burned out a while ago and I decided I would replace them with LEDs.
Pull out any burnt-out bulbs from the underside of the Santa Fe’s instrument cluster. Install new bulbs by pushing them into the sockets until they click into place. Place the instrument cluster back into the Santa Fe. Reconnect its electrical connection and reinstall the four screws. Reattach the dash panel and reinstall its two screws.
Where are the brake lights on a Hyundai Santa Fe?
Slide the tail light housing straight off the rear corner of the SUV and turn it over to access the bulb sockets. The orange plastic Brake light bulb socket is located at the top of the housing. Rotate the bulb socket 1/4 turn counterclockwise and pull it straight out.
Pull the cluster out of the vehicle. Pull out any burnt-out bulbs from the underside of the Santa Fe’s instrument cluster. Install new bulbs by pushing them into the sockets until they click into place. Place the instrument cluster back into the Santa Fe. Reconnect its electrical connection and reinstall the four screws.
What kind of light bulb do I need for my Hyundai?
Find the Hyundai headlight bulb size you need for your low beam or high beam. Also, find your Hyundai fog light bulb, reverse light bulb, turn signal bulb, brake light bulb and more. It’s that easy!