When to use the p0711 circuit code?

When to use the p0711 circuit code?

Code P0711 is set when the PCM detects a performance problem with the transmission fluid temperature sensor. An example of a transmission fluid temperature sensor: Related trans fluid temperature sensor “A” circuit codes: P0710 Transmission Fluid Temperature Sensor A Circuit Malfunction

What does p0711 mean on a transmission fluid sensor?

P0711 Meaning. The ATF (Automatic Transmission Fluid) Temperature Sensor converts the fluid temperature into a resistance value. The sensor resistance changes with the transmission fluid temperature.

What is the severity of the p0713 code?

P0713 Transmission Fluid Temperature Sensor A Circuit High Input P0714 Transmission Fluid Temperature Sensor A Circuit Intermittent The severity of this code is moderate to severe. In some cases, this code can indicate a transmission problem.

How much does it cost to diagnose p0711 Hyundai Code?

The cost of diagnosing the P0711 HYUNDAI code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour. When is the P0711 HYUNDAI code detected?

What are the causes of a p0748 transmission code?

Causes for this P0748 transmission code may include: 1 Defective Pressure Control Solenoid 2 Dirty or contaminated fluid 3 Dirty or clogged transmission filter 4 Defective Transmission Pump 5 Defective Transmission Valve Body 6 Restricted hydraulic passages 7 Corroded or damaged connector 8 Faulty or damaged wiring 9 Faulty PCM

Code P0711 is set when the PCM detects a performance problem with the transmission fluid temperature sensor. An example of a transmission fluid temperature sensor: Related trans fluid temperature sensor “A” circuit codes: P0710 Transmission Fluid Temperature Sensor A Circuit Malfunction

P0713 Transmission Fluid Temperature Sensor A Circuit High Input P0714 Transmission Fluid Temperature Sensor A Circuit Intermittent The severity of this code is moderate to severe. In some cases, this code can indicate a transmission problem.

What are the symptoms of a p0711 engine code?

In some cases, this code can indicate a transmission problem. It’s a good idea to address this code as soon as possible. Symptoms of a P0711 engine code may include: Illuminate check engine light. Improper torque converter clutch operation. Harsh or delayed shifts. Vehicle stuck in limp mode.

How to repair a p0711 transmission fluid sensor?

Diagnostic and Repair Procedures 1 Do some preliminary circuit testing. Use a scan tool to monitor the transmission temperature sensor data parameter. 2 Test the sensor. Disconnect the transmission fluid temperature sensor connector. 3 Check the circuit. 4 Check the ground side of the circuit. …

What is code p0711 on Hyundai Accent?

Hyundai Accent P0711 Code Meaning : When you check Hyundai Accent car engine light came on code P0711 the reason should be Engine Light ON (or Service Engine Soon Warning Light). However manufacturer may have a different definition for the P0711 OBD-II Diagnostic Powertrain (P) Trouble Code. So you should chech it on our car models.

What is OBD code p0071?

What Does P0071 Code Mean? OBD-II Code P0071 is defined as a Ambient Air Temperature Sensor Range/Performance The ambient temperature sensor helps the engine control module (PCM) determine how much fuel to use on startup. The PCM also uses this signal as a logic reference for other temperature sensors on the engine.

What is code p0707?

P0707 is a generic OBD2 trouble code that points to a fault within the transmission range sensor. This code may be seen with various other transmission codes. What the P0707 code means. The P0707 diagnostic trouble code means the transmission range sensor circuit has low voltage input.

P0711 Meaning. The ATF (Automatic Transmission Fluid) Temperature Sensor converts the fluid temperature into a resistance value. The sensor resistance changes with the transmission fluid temperature.

When to use the p0751 Shift Solenoid code?

The P0751 code is detected when the gear required by the ECM does not match the actual gear when vehicle is driven. P0751 Possible Symptoms Engine Light ON (or Service Engine Soon Warning Light) Transmission will not shift gears. P0751 Description

What are the causes of transmission temperature sensor p0711?

P0711 Possible Causes 1 Faulty Transmission Fluid Temperature Sensor 2 Transmission Fluid Temperature Sensor harness is open or shorted 3 Transmission Fluid Temperature Sensor circuit poor electrical connection

In some cases, this code can indicate a transmission problem. It’s a good idea to address this code as soon as possible. Symptoms of a P0711 engine code may include: Illuminate check engine light. Improper torque converter clutch operation. Harsh or delayed shifts. Vehicle stuck in limp mode.