Why is the fan not running in my Hyundai Santa Fe?
If you mean the fan inside the passenger area, then there is a wiring problem in the controls someplace like the switch or a resistor. The heater/A/C fan should always run regardless of the temperature as long as you turn the switch on. 3 people found this helpful.
Where are the fuse panels on a Hyundai Santa Fe?
Here you will find fuse box diagrams of Hyundai Santa Fe 2013, 2014, 2015, 2016, 2017 and 2018, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.
Can a blown fuse on a Santa Fe Sport be replaced?
Some components may have multiple fuses, so make sure you check all of the fuses that are linked to the component in question. If you need to replace a blown fuse in your Santa Fe Sport, make sure you replace it with one that has the same amperage as the blown fuse.
When to turn off cooling fan in Santa Fe?
If the cooling fan in the engine compartment, that should never come on when you start a car until the engine coolant temperature comes above a predetermined temp, usually between 190 and 210 degrees. Then it comes on just long enough to drop the temp down and turns off.
Is there a problem with the blower motor on a Hyundai Sonata?
Hyundai owners are often stuck for answers when they are up against blower motor problems. The solution here is to ask an Expert. Read on to see how Experts have analyzed some common blower motor issues and provided answers to questions. Which fuse on a manually controlled Hyundai Sonata protects the blower motor?
Why does my Hyundai Elantra blower motor not work?
Why does a Hyundai Elantra blower motor work only intermittently at all speed settings? Evidently the motor is not making a proper contact because the connection to the blower motor and resistor might be loose or might even have burnt. The insulator panel will need to be removed to check this.
Where is the speed control on a Hyundai blower?
There appears to be a problem with the blower speed control which is located next to the blower motor below the blower case. Check the circuit with a test light or voltmeter, especially the wiring from the motor to the speed control. If there’s no problem so far, check the blower motor itself which might have failed.
Can you change the resistor on a Hyundai blower?
If that is good try the blue wire next which should run the blower on medium then the white wire which should run the blower at low speed. If it runs properly on all three speeds it confirms that the resistor is good. Merely changing a resistor is no guarantee that the replaced resistor is good.
How does the radiator fan relay work in a Hyundai?
When it senses that engine coolant temp has reached a point where it needs cooling, the ECM provides ground to the radiator fan relay control coil. The relay activates and provides power to the radiator fan. The AC condenser fan relay is activated by the ECM when the AC switch is turned on.
When did the Hyundai Santa Fe come out?
In this article, we consider the first-generation Hyundai Santa Fe (SM), produced from 2001 to 2006. Here you will find fuse box diagrams of Hyundai Santa Fe 2004, 2005 and 2006, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.
Here you will find fuse box diagrams of Hyundai Santa Fe 2004, 2005 and 2006, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay. Information from the owner’s manuals of 2004, 2005 and 2006 is used.
Hyundai owners are often stuck for answers when they are up against blower motor problems. The solution here is to ask an Expert. Read on to see how Experts have analyzed some common blower motor issues and provided answers to questions. Which fuse on a manually controlled Hyundai Sonata protects the blower motor?
Why does a Hyundai Elantra blower motor work only intermittently at all speed settings? Evidently the motor is not making a proper contact because the connection to the blower motor and resistor might be loose or might even have burnt. The insulator panel will need to be removed to check this.
If that is good try the blue wire next which should run the blower on medium then the white wire which should run the blower at low speed. If it runs properly on all three speeds it confirms that the resistor is good. Merely changing a resistor is no guarantee that the replaced resistor is good.
When does the blower turn off on a 2010 Santa Fe?
We have a 2010 Santa Fe A common occurrence has been to be driving along with the heat/blower on over half close to 3/4. All of a sudden the blower will turn off without even touching it. It will go on and off randomly without even touching it.
Why is my Hyundai Santa Fe not turning?
If you’ve broken a drive/axle shaft, your Hyundai Santa Fe’s transmission has no way to turn the wheels anymore. If this were the case, there would not be any movement whatsoever from the vehicle. You also wouldn’t feel the slight jerk your Santa Fe as you put it into gear.
Why is my Hyundai Santa Fe blowing warm air?
When diving in the rain the A/C will start blowing warm air. Turning it off and on or to heat has no effect. Turning off the ignition and back on will start it back to cold air. Nothing else will help. The dealer could not repeat the problem so he said bring it back in when it is blowing warm air which is almost impossible to do.
What’s the temp on a Hyundai Santa Fe?
With climate control set at 72 and driving in 85 deg summer weather I crossed into a valley where the temp dropped abruptly to 65 deg. The compressor shut off and would not come on in any mode – A/C, Auto or defrost.