Can any wire be used as an antenna?
Assuming its not connected to speakers, any copper wire can be used to make an antenna as long as length and method of connecting are taken into account. Even if the wire IS connected to speakers, with clever use of filters (traps) it might still be possible. The ARRL publishes an excellent book on antennas.
Which antenna cable is best for digital TV?
Coaxial cable designed for domestic television should be 75 Ohm, with RG-6 coaxial being ideal for TV. The best coaxial cable for HDTV is RG-11. This type of cable offers a higher gauge than others, which provides more space for signals to transfer.
What’s the best way to replace a RC car antenna?
The best way to do this is to either use some kind of oil or even talcum powder. This will allow it to slide through the tube with no problem whatsoever. You can put it directly onto the wire and then lubricated through the tubing.
Is it OK to cut the antenna wire?
Please Don’t Cut it Avoid cutting the antenna receiver wire. If you cut the antenna receiver wire there is a chance that it could cause interference or cause some loss of communication between the controller and the receiver so this is not advisable.
What do you do if your radio control antenna gets damaged?
What do you do if the antenna of your 2.4GHz radio control receiver gets damaged — as so easily happens when spinning propellers are involved. Here’s a quick video to show you the process. The important thing here is that you leave 31mm of the inner wire (complete with its insulation) exposed after you remove the outer insulation and screen/mesh.
What’s the best way to replace RC Car Wire?
The idea is to feed the wire through the plastic tubing provided, so that you can install and replace the wire. The best way to do this, rather than trying to force it through, is to lubricate the wire so that it slides through the plastic tubing without any issues. The best way to do this is to either use some kind of oil or even talcum powder.
What are the parts for the Mini Cooper antenna?
MINI Factory replacement Antenna parts. Antenna, Base, and Bracket are available separately. [ ] Standard Stereo with no options. The antenna uses the smaller M5 stud. [ ] Stereo with Navigation or Bluetooth or Satellite Radio or USB Audio. The antenna uses the larger M6 stud. The threads on the antenna for the ‘standard’ vs. Nav/Sat are different.
What do I need to replace my Butternut antenna?
They offer their capacitors, coaxial matches, coils and many other parts. Whether used for maintenance or for repairs due to unfortunate damage, Butternut offers the replacement antenna parts that you need. Butternut has offered their high performance antennas for decades.
What kind of Coax does a butternut antenna use?
The original 75 ohm matching cable ended in two wires and over time the insulation degraded and the wire was exposed to the elements. This replacement coax ends in a PL-259. The included adapter has an SO-239 that fits neatly into the DX Engineering radial plate allowing a much better ground connection.
Can a standard antenna fit a standard base?
Only the Standard Antenna will fit the Standard base, and the Nav/Sat Antenna will only fit the Nav/Sat Base. If you have your damaged antenna rod, take a look at the bottom of the stud to help identify the stud size. The M6 Stud has a recess on the end that is filled with Blue paint. The M5 stud does not have a recess or paint.