How do you turn off the low tire pressure light on a Hyundai Tucson?
Depress the TPMS reset button located below the steering wheel until it blinks three times. Turn the ignition off and remove the key. Start the engine and let it run for 20 minutes while the system records the new pressure of each tire.
Where is the TPMS reset button Tucson?
steering wheel
The TPMS reset button is usually located under the steering wheel.
How to reset low tire pressure light on Hyundai Tucson?
The Low Tire Pressure LCD position indicator will remain on and the TPMS Malfunction Indicator may blink for one minute and then remain illuminated until you have the low pressure tire repaired and replaced on the vehicle. There is no option to reset low tire pressure on Hyundai Tucson.
What happens when the TPMS light is on?
Most of the time when the TPMS light is on, one or more tires do have low air pressure. This system has prevented many accidents by alerting the driver to a flat tire before the vehicle lost control. It’s important not to rely on TPMS to maintain your tires.
How does a low tire pressure light work?
The TPMS (or Tire Pressure Monitoring System) uses sensors on the vehicle to determine when a tire has low pressure and alerts the driver with a warning light so the tires can be checked out.
How do I reset the tire pressure light?
With the vehicle off, turn the key to the “On” position, but don’t start the car. Hold the TPMS reset button until the tire pressure light blinks three times, and then release it. Start the car and wait 20 minutes for the sensor to refresh.
The Low Tire Pressure LCD position indicator will remain on and the TPMS Malfunction Indicator may blink for one minute and then remain illuminated until you have the low pressure tire repaired and replaced on the vehicle. There is no option to reset low tire pressure on Hyundai Tucson.
How to fix a low tire pressure light?
Next step in the process is to press the located button for three seconds. Once the light blinks for three times on the dashboard, this means the TPMS is reset. After this, turn off the engine and again start it after five seconds (from the time, light blinks). This would resolve the issue.
How to reset a stuck low pressure ( TPMS ) light?
Put the key in the ignition and turn it to the “on” position, but do not start the car. Press and hold down the reset button (sometimes located under the steering wheel) until the low-pressure light blinks three times. Release the button. Start the vehicle and let it run for 20 minutes to let its computer re-calibrate each sensor.
Can a low tire pressure light be a false signal?
However, the system may fail and send wrong signals to you. Typically, a Tire Pressure Monitoring System (TPMS) will illuminate. It happens should the tire pressure drop. It will precisely light up if the pressure drops 25% below the required value. In our case, the TPMS may be issuing false signals. What can you do?