What kind of oil goes in a 2014 Hyundai Santa Fe?
Engine Oil SAE 5W-20 is preferred. Capacity: 4.9 quarts (with filter)If vehicle is equipped with a yellow dipstick. After refill check oil level.
Can you change the oil on a Hyundai Santa Fe Sport?
Oil & Filter Change Hyundai Santa Fe Sport (2013-2018) – 2013 Hyundai Santa Fe Sport 2.4L 4 Cyl. 1. Getting Started – Prepare for the repair 2. Open the Hood – How to pop the hood and prop it open
How do you loosen the oil filter on a Hyundai Santa Fe?
If you have trouble loosening the old oil filter, you may need to use an oil filter wrench such as the Lisle # 63600. Attach the oil filter wrench to a short 3/8″ extension bar and a ratcheting wrench. Rotate the wrench counterclockwise to loosen the oil filter.
Where can I get a new crush washer for my Hyundai Santa Fe?
A new crush washer can be purchased at the parts counter of any Kia or Hyundai dealership. Crush washers can usually be re-used a few times before needing to be replaced. Re-insert the oil drain bolt and tighten in the clockwise direction to just past hand tight or about 20 to 25 ft-lbs of torque.
How to change the oil in a Mitsubishi Montero Sport?
Find Oil Filter – Locate the oil filter 6. Remove Filter – Position drain pan and remove the oil filter 7. Replace Filter – Add oil to the new oil filter and insert it 8. Remove Oil Cap – Take off the oil fill cap
Oil & Filter Change Hyundai Santa Fe Sport (2013-2018) – 2013 Hyundai Santa Fe Sport 2.4L 4 Cyl. 1. Getting Started – Prepare for the repair 2. Open the Hood – How to pop the hood and prop it open
If you have trouble loosening the old oil filter, you may need to use an oil filter wrench such as the Lisle # 63600. Attach the oil filter wrench to a short 3/8″ extension bar and a ratcheting wrench. Rotate the wrench counterclockwise to loosen the oil filter.
A new crush washer can be purchased at the parts counter of any Kia or Hyundai dealership. Crush washers can usually be re-used a few times before needing to be replaced. Re-insert the oil drain bolt and tighten in the clockwise direction to just past hand tight or about 20 to 25 ft-lbs of torque.
Find Oil Filter – Locate the oil filter 6. Remove Filter – Position drain pan and remove the oil filter 7. Replace Filter – Add oil to the new oil filter and insert it 8. Remove Oil Cap – Take off the oil fill cap