What are the timing marks on a Hyundai 2010?
Looking for a pic of the timing marks for the 1.6 dohc hyundai 2010. I’ve got the crank on TDC and exhaust cam on the mark. But dont have a guide to go off for 2nd cam.
How do you put timing marks on a car?
Install the crankshaft sprocket (A). Align the timing marks of the camshaft sprocket (A) and crankshaft sprocket (B) with the No.1 piston placed at top dead center and its compression stroke. Install the idler pulley (A) and tighten the bolt (B) to the specified torque. Temporarily install the timing belt tensioner (A).
Where is timing mark on cylinder head cover?
Turn the crankshaft pulley, and align its groove with timing mark “T” of the timing belt cover. Check that the timing mark of camshaft sprocket is aligned with the timing mark of cylinder head cover. (No.1 cylinder compression TDC position)
What are the timing marks on a cam?
Normally the chain link will have three marks on it. Like two yellow and an orange. The cam and crank sprockets will have a mark on them where the color links will go on. Unfortunately since your vehicle is a 2015 the manufacture has not released any information for that repair. If the timing is not set properly you will damage the valves.
Where is the timing mark on a camshaft?
Turn the crankshaft pulley, and align its groove with timing mark “T” of the timing belt cover. Check that the timing mark of camshaft sprocket is aligned with the timing mark of cylinder head cover. (No.1 cylinder compression TDC position) Remove the crankshaft pulley bolt and crankshaft pulley (A).
How do you find timing marks on a crankshaft?
Locate the micro phone close to the center of belt span (T1, T2) and bounce the belt by finger 2 – 3 times. Read a value on the display. Turn the crankshaft two turns in the operating direction (clockwise) and realign crankshaft sprocket and camshaft sprocket timing mark. Install the timing belt lower cover (A) with 5bolts (B).