How do you turn off the airbag light on a Hyundai?
Turn on the code reader and move the arrows on the menu to the “Erase” function and then press “Enter”. Remove the OBD II code reader from the DLC and start the engine. Look at the instrument panel to make sure the airbag light turned off.
How to turn on the airbag warning light?
If the sensor mat isn’t working properly, trouble codes B1447 and B1448 can set and turn on the Airbag warning light Start by disconnecting the battery terminal from your car battery. Wait for at least 3 minutes for the airbag system to power down. Clear everything from the under the passenger seat.
Why does my air bag light keep coming on?
well, idk if just pulling a ‘air bag ind’ fuse would disable the system or not, but if whatever is causing the air bag light to come on in the first place is going to prevent the air bag from going off already then i guess it doesn’t matter much.
How to check the B1448 airbag light on Hyundai Accent?
If the code is still there. unplug the six terminal connector going to the sensor mat under the passenger seat. Reconnect the battery. With the key in the RUN position check for battery voltage on terminal 1 (red/black wire) and ground terminals 3 & 5 (black wires). Next, check the voltage at terminal 2 in the connector (red/black) wire.
What to do if your airbag light never comes on?
if it never comes on, check the fuse. if it comes on, blinks like 5 times and shuts off (aka self testing), and never comes back on, then your SRS is operating correctly. if it never blinks, and just stays on all the time, then you have a hard code. you will have to take it to a shop to get diagnosed and turned off.
Where is the diagnostic plug on a Hyundai?
Find the diagnostic-link connector underneath the driver’s side of the car on the dashboard. Examine the shape of this receptive port and then compare it to your OBD II code reader to make sure the plug will fit into the connector. If the shapes match, plug the reader into the DLC.
Turn on the code reader and move the arrows on the menu to the “Erase” function and then press “Enter”. Remove the OBD II code reader from the DLC and start the engine. Look at the instrument panel to make sure the airbag light turned off.
When does the air bag light stop flashing?
The light will flash for exactly seven seconds. Once it is off, you have to turn off the ignition within a second. Turn the ignition on again after three seconds. Repeat this process for two or three times and the airbag light will stop flashing. This is the time you’ll know that it is reset. (Part 1) How To Fix Airbag Light – Fast & Easy!
Why is the airbag light on in my car?
Low car battery could trigger the airbag light to turn on. The spring does the job of maintaining the continuity between the driver seat’s airbag and electrical wiring.
Do you need to reset the airbag light?
When working on the electrical components in your dash, you may find you will also need to reset the airbag light once it is all put back together. Many people who try to do their own work, like putting in a car radio, will sometimes neglect to plug in all of the airbag components. This will cause the airbag light to blink.
Why does my car airbag light keep blinking?
Many people who try to do their own work, like putting in a car radio, will sometimes neglect to plug in all of the airbag components. This will cause the airbag light to blink. Resetting the light is an easy car repair you can DIY. Here are some easy steps to reset the airbag light.
How to fix your airbag SRS warning light?
A no cost easy way to reset and fix your airbag SRS warning light. Perform this with the ignition key in the off position. Please subscribe, like and comment. You might also like to watch https://youtu.be/yMXm5IVQW9A Loading…
Is there a way to reset the airbag light?
The airbag light will often go away by itself after repairing the problem, but not in all car models. After you have installed the new parts and are 100% sure that the parts are installed correctly, it’s time to reset the engine light. To do this – you need to use an OBD2 scanner, and it’s not possible in another way.
When do you need the Hyundai Sonata airbag light reset?
The seatbelts provided enough safety. However, when an accident like a head-on collision occurs, the module senses that both the seat belts need to tighten and the airbags need to deploy to keep the driver as well as the passengers safe. If your airbags have deployed, you will need to get a Hyundai Sonata Airbag light reset or repair service.
What should I do if my airbags have deployed?
If your airbags have deployed, you will need to get a Hyundai Sonata Airbag light reset or repair service. You want to make sure your airbags, seatbelts, and all other parts of your Hyundais SRS will work properly if an accident occurs. A dealer is likely to tell you that you need to get a new airbag module, which can cost you upwards of $1,000.
The seatbelts provided enough safety. However, when an accident like a head-on collision occurs, the module senses that both the seat belts need to tighten and the airbags need to deploy to keep the driver as well as the passengers safe. If your airbags have deployed, you will need to get a Hyundai Sonata Airbag light reset or repair service.
Why do I need to Reset my airbag light?
If you answered yes to any of these questions, you may be in need to have your airbag light or module repaired or reset. An airbag module is the brains of your cars Supplemental Restraint System, also known as the SRS. It uses the sensors in your Hyundai to determine what action is necessary when your vehicle has been in an accident or collision.
Why does the airbag light come on on a Hyundai Elantra?
Your airbag light is part of your Elantra’s larger supplemental restraint system. It works in tandem with the system to protect you in the event of an accident. If all parts of this system are not working properly, it can cause the airbag light to come on.