How to repair front hub on Hyundai Santa Fe?
Repair procedures 1. Remove the front wheel and tire (A) from front hub. Be careful not to damage to the hub bolts when removing the front wheel and tire (A). 2. Remove the rear brake caliper. 3. Remove the wheel speed sensor (A), from the knuckle. 4. Remove the coking nut (A). The front hub coking nut should be replaced with new ones.
What should I do about my Hyundai Santa Fe?
Hyundai Santa Fe DM 2013-2018 Service Manual / Suspension System / Front Suspension System / Sub Frame. Repair procedures 1. Remove the front wheel and tire (A) from front hub .
How to repair a Hyundai Santa Fe rear axle carrier?
Remove the hub assembly mounting bolts (A-4ea) from the rear axle carrier (B). 2. Remove the hub assembly (C) and the parking brake assembly (B) from the rear axle carrier (A). Do not disassemble the hub assembly. 3. Assembly is the reverse order of disassembly. 1. Check the hub for cracks and the splines for wear. 2.
How to remove the front door panel on a Hyundai Santa Fe?
We demonstrated on a 2007 Hyundai Santa Fe Front Left Door Panel. All you will need is a very small screwdriver or knife to open the screw caps and a phillips screwdriver. The Left Rear and the Right Rear Door Panel procedure is very similar, as well. Once you see the video, it should not take you more than 10 minutes to do it yourself.
Repair procedures 1. Remove the front wheel and tire (A) from front hub. Be careful not to damage to the hub bolts when removing the front wheel and tire (A). 2. Remove the rear brake caliper. 3. Remove the wheel speed sensor (A), from the knuckle. 4. Remove the coking nut (A). The front hub coking nut should be replaced with new ones.
How to repair a Hyundai Santa Fe suspension?
Hyundai Santa Fe DM 2013-2018 Service Manual / Suspension System / Front Suspension System / Front Strut Assembly. Repair procedures 1. Remove the front wheel and tire (A) from front hub . Be careful not to damage to the hub bolts when removing the front wheel and tire (A). 2.
Remove the hub assembly mounting bolts (A-4ea) from the rear axle carrier (B). 2. Remove the hub assembly (C) and the parking brake assembly (B) from the rear axle carrier (A). Do not disassemble the hub assembly. 3. Assembly is the reverse order of disassembly. 1. Check the hub for cracks and the splines for wear. 2.
How to check front alignment of Hyundai Santa Fe?
Check the front alignment. 1. Remove the dust cover (A). 2. Using the special tool (09546-26000), compress the coil spring (A). 3. Remove the self-locking nut (C) from the strut assembly (B). 4. Remove the insulator, spring seat, coil spring and dust cover from the strut assembly.