Why are the brake lights not working on my Hyundai?
A MALFUNCTIONING STOP LAMP SWITCH MAY CAUSE THE BRAKE LIGHTS TO NOT ILLUMINATE WHEN THE BRAKE PEDAL IS DEPRESSED OR MAY CAUSE THE BRAKE LIGHTS TO REMAIN ILLUMINATED WHEN THE BRAKE PEDAL IS RELEASED.
Are there any problems with the Hyundai Elantra?
Hyundai Elantra owners have reported 8 problems related to brake abs warning light (under the service brakes category). The most recently reported issues are listed below. Also please check out the statistics and reliability analysis of Hyundai Elantra based on all problems reported for the Elantra.
Why is the ABS warning light on on my Hyundai Elantra?
See all problems of the 2012 Hyundai Elantra . The abs warning light was noted to be on continuously for more than a week. The problem was traced to a broken wire in the main engine harness. There was no noticeable change in performance of the vehicle.
Can you replace a brake light that has fallen out?
Yes, as long as the switch still works. Typically the stop falls out or breaks before the switch fails. You can test this by sticking a piece of cardboard between the hole and the button on the switch. If the lights turn off, then the switch is working and you just need to replace the stop. Thanks!
Why is my Hyundai Elantra brake warning light not working?
As the vehicle was off, a white color smoke began to emit from the abs system of the engine. Upon further inspection, the contact’s husband saw that the wires connected to the abs had began to melt; therefore, he disconnected the battery and fuses. The vehicle had yet to be serviced or diagnosed for the failure.
Hyundai Elantra owners have reported 8 problems related to brake abs warning light (under the service brakes category). The most recently reported issues are listed below. Also please check out the statistics and reliability analysis of Hyundai Elantra based on all problems reported for the Elantra.
Yes, as long as the switch still works. Typically the stop falls out or breaks before the switch fails. You can test this by sticking a piece of cardboard between the hole and the button on the switch. If the lights turn off, then the switch is working and you just need to replace the stop. Thanks!
Where is the brake light switch on a car?
As you press the pedal, the shaft presses the button, which turns on the brake lights. If you are unsure where to locate your brake pedal switch, refer to the service manual for your specific vehicle. The switch will have a wired pigtail coming off of it and will be mounted directly behind the brake pedal.