What is the problem if the washing machine wont spin?
If your washer fills with water but doesn’t agitate, the problem is likely to be a faulty lid switch, a broken belt, or a problem with the motor. (Note: Direct-drive washing machines do not have belts.)
Why is my washer not starting?
You should check the outlet to make sure it’s working. Then, check if a fuse is blown or a circuit breaker thrown. If those both work, see if the Delay Start button or Control Lock feature has been activated. Sometimes it’s as simple as opening and closing the door to reset the washer.
Why is my washer stuck on the spin cycle?
The first step when you discover that your washing machine won’t stop spinning is to put a stop to it. If resetting the washer did not work, then it most likely means that your timer is malfunctioning. The washer could have gotten stuck on any cycle, unfortunately, it just got stuck on spin.
Why does my washer get stuck on the spin cycle?
If you have found that your washer won’t move on from any cycle, be it the wash, rinse, or spin cycle, then what you have is a problem with your timer. Once the timer for that set cycle is finished, it signals the washer to move onto the next cycle. However, if the timer has failed, it won’t send those signals out.
Why isn’t my front load washer spinning?
Front-load washer tubs spin thanks to a drive belt that runs off of the motor. A loose, frayed, or torn belt could be why your washer won’t spin. Overloading your washing machine can cause the belt to loosen or become worn out. Inspect the drive belt closely.
Does spin and drain dry clothes?
It rinses the clothing with clean water and then spins at a fast speed to remove any moisture from the load. This setting can be used after a wash to, remove excess water, however the clothing will not be fully dry. – Drain. This programme is intended to drain the machine of water.
Why is the spindle on my CNC not spinning?
Now when I power on the VFD, the spindle will start a slow rotation which can be reversed by manually clicking the directional button on the vfd display, and the display just shows the number 5 which I am assuming is the rpm, but I have no clue. I have no idea what configuration it is setup for.
Why does my computer fan spin but not start?
It initially spins a rotation or two and that is it. It (fan on CPU) does the same thing when I power it off, just a initial spin but doesn’t move. Any ideas…I would be so grateful. Here are my system specs (all bought from Newegg)
Why does my car not start when I rotate the motor?
[Edit: Also, you could very slowly rotate the motor and see if it starts – if this does it, there could be a dead zone on the servo or brush inside the motor and maybe a new one would fix it] Sorry I can’t give you a direct answer – those things aren’t really my area of expertise either!
Why does my Mach3 spindle not turn on?
Spindle will not run. I have no clue what happened. Spindle was controlled by MACH3, I run the program, it turns on, program stops it. I have no idea how to get it manually to turn on with all the buttons on the outside.
What to do if your starter wont spin?
Put a socket and breaker bar or wrench on the bolt at the front of the crankshaft and see if you can rotate the engine. If you can, then check all your battery cables. My guess is (because I used to do this myself) is that you removed the starter and used jumper cables to check it and not the battery cables in the vehicle.
What causes lawn mower engine to spin but not start?
Hi, Wayne here from Sears PartsDirect. Today we’re going to troubleshoot a riding lawn mower engine that spins but won’t start when the starter motor runs. Once it’s spinning, the engine needs 3 things to run—fuel, spark and compression. Here’s a quick test that can often eliminate 2 of those suspects right away.
What does it mean when your record player Won’t Spin?
If it is not reset, the player will not spin. If it looks like the tonearm may not be pushed back far enough, simply lift it and move it toward the right hand side. You should hear a clicking sound to indicate that it has been reset. This is a surprisingly common problem that has left many users of record players wondering where they went wrong.
What does it mean when your computer wont start?
My computer would not start today. I pushed the start button and the case fan would spin a little and stop repeatedly, the graphics card light would flash, the mother board has an ezdebug feature and the light next to the cpu option was blinking. That’s as much as it will do now.