How to remove driver airbag module from Hyundai Santa Fe?

How to remove driver airbag module from Hyundai Santa Fe?

Release the connector locking pin, then disconnect the driver airbag module connector (C). The removed airbag module should be stored in a clean, dry place with the pad cover facing up. 5. Remove the steering wheel and steering wheel column shroud. 6. Disconnect the clock spring and horn connector, then remove the clock spring.

What should I do about my Hyundai Santa Fe?

Hyundai Santa Fe DM 2013-2018 Service Manual / Restraint / Airbag Module / Driver Airbag (DAB) Module and Clock Spring. Repair procedures 1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2.

When did the Hyundai Santa Fe come out?

Introduced in 2001, it was at first criticized by the journalists for its obscure look, but the American buyers thought the other way. The Santa Fe became a great hit for Hyundai and at times, Hyundai had trouble to meet the demand.

How to change the clock on a Hyundai Santa Fe?

1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable from the battery and wait for at least three minutes before beginning work. 3. Connect the clock spring harness connector and horn harness connector to the clock spring. 4.

How to replace the airbag module on a Hyundai Santa Fe?

Remove the steering wheel and steering wheel column shroud. 6. Disconnect the clock spring and horn connector, then remove the clock spring. If any improper parts are found during the following inspection, replace the airbag module with a new one.

Hyundai Santa Fe DM 2013-2018 Service Manual / Restraint / Airbag Module / Driver Airbag (DAB) Module and Clock Spring. Repair procedures 1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2.

How to remove and replace the airbag on a Hyundai Sonata?

All you are going to need is a T40 tool. It should not take you more than 5 minutes. Before removing the Airbag make sure that you UNHOOK the battery at least 30-60 minutes before doing the job. This procedure should cover the whole fifth Generation Sonata from 2006 to 2010. Also it should work on some Hyundai Santa Fe, Elantra, Accent and more.

1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable from the battery and wait for at least three minutes before beginning work. 3. Connect the clock spring harness connector and horn harness connector to the clock spring. 4.

How to repair steering wheel on Hyundai Santa Fe?

Disconnect the connector & lock nut (A) and then remove the steering wheel by using special service tools (09561-11001). Do not hammer on the steering wheel to remove it; it may damage the steering column. 5. Remove the steering column shroud. 6. Remove the clock spring. 7. Remove the multifunction switch. 8. Remove the crash pad lower panel. 9.

How to replace the steering wheel on a Kia Soul?

1. Disconnect the battery negative cable from the battery and then wait for at least 30 seconds. 2. Turn the steering wheel so that the front wheels can face straight ahead. 3. Remove the airbag module. 4. Disconnect the connector & lock nut (A) and then remove the steering wheel by using special service tools (09561-11001).

Release the connector locking pin, then disconnect the driver airbag module connector (C). The removed airbag module should be stored in a clean, dry place with the pad cover facing up. 5. Remove the steering wheel and steering wheel column shroud. 6. Disconnect the clock spring and horn connector, then remove the clock spring.

Is there steering wheel lockup on Hyundai Santa Fe?

Tl- the contact owns a 2019 Hyundai Santa Fe. The contact stated that while attempted to drive the vehicle, the steering wheel lockup. No warning light illuminated.

How do you remove the airbag from a Hyundai?

There are three locking pins that you will need to press to release the airbag, but since you can’t really see them, you will need to try for several minutes. Eventually, you will be able to release the airbag from the steering wheel. Disconnect the negative battery terminal.