How do you adjust projector headlight beams?
Turn on the low beams. Cover one headlight with a towel and adjust one headlight at a time. Adjust the screws at the rear of the headlight assembly so that the center of the beam aims exactly at the center of the “+” horizontally, and at the 2.1-inch lower mark vertically.
Why do projector headlights have steps?
the step allows for more forward light on the shoulder side, while limiting the light into oncoming traffic. This is what is missing in regular housings that makes them spray light all over the place, and blind people.
What to do if your Hyundai Sonata has a bad headlight?
If the headlights on your Hyundai Sonata are malfunctioning, they should be fixed immediately. Faulty headlights can obscure road vision and lead to car accidents and serious injury. Loose electrical connections, burned out bulbs and popped fuses create most headlight problems, and all three have a quick fix. Turn off the engine.
How do you adjust the position of the headlight?
Turn on the headlight switch. (Low Beam Position) 1. Adjust headlights so that main axis of light is parallel to center line of the body and is aligned with point “P” shown in the illustration. 2. Dotted lines in the illustration show the center of headlights. Horizontal center line of headlights from ground: 35.6 in. (904 mm).
How to adjust headlight beam on Hyundai Tucson?
Draw a vertical line (through the center of each headlight beam pattern) and a horizontal line (through the center of each headlight beam pattern) on the aiming screen. And then, draw a parallel line at 0.8 in. (21 mm) under the horizontal line.
When to adjust horizontal aiming on a Hyundai?
Horizontal aiming must be adjusted by an authorized Hyundai dealer to avoid incorrect alignment that will reduce the effectiveness of your headlights. If the vehicle has had front body repair and the headlight assembly has been replaced, the headlight aiming should be checked using an aiming chart as shown in the illustration.
Turn on the headlight switch. (Low Beam Position) 1. Adjust headlights so that main axis of light is parallel to center line of the body and is aligned with point “P” shown in the illustration. 2. Dotted lines in the illustration show the center of headlights. Horizontal center line of headlights from ground: 35.6 in. (904 mm).
Draw a vertical line (through the center of each headlight beam pattern) and a horizontal line (through the center of each headlight beam pattern) on the aiming screen. And then, draw a parallel line at 0.8 in. (21 mm) under the horizontal line.
Horizontal aiming must be adjusted by an authorized Hyundai dealer to avoid incorrect alignment that will reduce the effectiveness of your headlights. If the vehicle has had front body repair and the headlight assembly has been replaced, the headlight aiming should be checked using an aiming chart as shown in the illustration.
How big is the center line of headlights?
1. Adjust headlights so that main axis of light is parallel to center line of the body and is aligned with point “P” shown in the illustration. 2. Dotted lines in the illustration show the center of headlights. Horizontal center line of headlights from ground: 35.6 in. (904 mm). Distance between each headlight center: 53.4 in. (1,356 mm).