Is there a stereo system on a Hyundai Elantra?
The Elantra is Hyundai’s entry-level sedan. Like many other entry-level vehicles, it comes with a no-frills stereo system. Removing the Hyundai Elantra’s car stereo allows you to upgrade the system with an aftermarket unit.
Where are the hazard lights on a Hyundai Elantra?
Shown in the photo below. You can see the wire harness connecting to the back of the hazard lights here. Next remove the two wiring harnesses that connect to the clock (black wires) and passenger airbag sign (yellow wires) above the radio.
How do you install a new car stereo?
Connect the wiring harness adapter from metra into the stock wire harness. Then screw in your mounting bracket from metra using the four screw which previously held the old radio in place.
How do you remove the antenna from a stereo?
Unplug the emergency light switch from behind the panel then set the panel aside. Remove the four Phillips head screws surrounding the radio. Pull the stereo out of its mount and unplug the antenna cable and wiring harness. Always disconnect the battery cable.
How to install a car radio in a Hyundai Elantra?
Next remove the two wiring harnesses that connect to the clock (black wires) and passenger airbag sign (yellow wires) above the radio. This picture looks up from the bottom of the radio with the fascia loosened. Notice the two wire harnesses above the radio. Step 3). Remove the Stock Radio Unscrew the four screws which surround the unit.
Shown in the photo below. You can see the wire harness connecting to the back of the hazard lights here. Next remove the two wiring harnesses that connect to the clock (black wires) and passenger airbag sign (yellow wires) above the radio.
Connect the wiring harness adapter from metra into the stock wire harness. Then screw in your mounting bracket from metra using the four screw which previously held the old radio in place.