What is Hyundai traction control?
On slippery road surfaces, the traction control system (TCS) limits the drive wheels from spinning excessively, thus helping the car to accelerate. It also helps to provide sufficient driving force and steering performance as the car turns.
How does the traction control system work in a Hyundai?
Adjust you driving accordingly. To turn the system back on, press the switch again. The TCS-OFF indicator should go off. 1) The TCS mode will automatically be turned ON after the engine is turned off and restarted. 2) When the traction control system is operating properly, you can feel a slight pulsation in the vehicle.
What are the components of a Hyundai Santa Fe?
Variable Intake Solenoid (VIS) Valve 23. Fuel Pressure Regulator Valve 24. Canister Close Valve (CCV) 25. Ignition Coil 26. Main Relay 27. Fuel Pump Relay 28. Data Link Connector (DLC) [16-Pin] 29. Multi-Purpose Check Connector [20-Pin] 1. Engine Control Module (ECM) 2. Manifold Absolute Pressure Sensor (MAPS) 3.
Where are the ignition coils on a Hyundai Santa Fe?
Schematic Diagrams ECM Terminal And Input/Output signal ECM Terminal Function Connector [C100-A] Pin No. Description Connected to 1 Ignition Coil (Cylinder #2) control output [NON-smart key type] Ignition Coil (Cylinder (Option/accessory.)
How to remove battery from Hyundai Santa Fe?
Open the tailgate. 2. Find the plastic hex bolt cover and remove the cover with coin or flathead Removal 1. Disconnect the battery negative cable from the battery and then wait for at least 30 seconds. 2. Turn the steering wheel so that the front wheels can face straight ahead.
Adjust you driving accordingly. To turn the system back on, press the switch again. The TCS-OFF indicator should go off. 1) The TCS mode will automatically be turned ON after the engine is turned off and restarted. 2) When the traction control system is operating properly, you can feel a slight pulsation in the vehicle.
Variable Intake Solenoid (VIS) Valve 23. Fuel Pressure Regulator Valve 24. Canister Close Valve (CCV) 25. Ignition Coil 26. Main Relay 27. Fuel Pump Relay 28. Data Link Connector (DLC) [16-Pin] 29. Multi-Purpose Check Connector [20-Pin] 1. Engine Control Module (ECM) 2. Manifold Absolute Pressure Sensor (MAPS) 3.
What kind of Fuse does a Hyundai Santa Fe have?
Hyundai Santa Fe (2004 – 2006) – fuse box diagram Year of production: 2004, 2005, 2006 Engine compartment Description Ampere rating [A] Protected components FUSIBLE LINK ALT 120 Generator B+ 50 Tail lamp relay, Fuse 11~17, Power connector IGN 50 Start relay, Ignition switch BLR 40 A/C Fuse, Blower relay ABS.1 30 ABS control module, …
Schematic Diagrams ECM Terminal And Input/Output signal ECM Terminal Function Connector [C100-A] Pin No. Description Connected to 1 Ignition Coil (Cylinder #2) control output [NON-smart key type] Ignition Coil (Cylinder (Option/accessory.)