What is the trouble code on a Hyundai Accent?

P0420 is a very common trouble code. This code number references a number that is given to you when you plug your Hyundai Accent into a OBDII scanner. It doesn’t matter which model you have, this OBDII code has the same meaning for all of them (1996+) P0420 is a OBDII trouble code.

What does trouble code P0420 mean on Hyundai Accent?

How does the p2191 Hyundai Powertrain Control Module work?

P2191 HYUNDAI Description In order to provide the best possible combination of driveability, fuel economy and emission control, the Powertrain Control Module (PCM) uses a closed loop air/fuel metering system. The PCM monitors the HO2S signal voltage and adjusts fuel delivery based it in closed loop fuel control.

How to diagnose p2191 Hyundai system too lean?

Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. How much do you know about cars? The cost of diagnosing the P2191 HYUNDAI code is 1.0 hour of labor.

What does the code p2191 mean on a car?

How serious is the P2191 code? Code P2191 is a code indicating the engine is running lean on only one side, and this lean condition can cause internal engine damage or cause the engine to misfire. What repairs can fix the P2191 code?

What kind of engine is the p2192 code for?

This generic powertrain/engine diagnostic trouble code typically applies to fuel injected engines from most European and Asian manufacturers since 2010. Those manufacturers include but are not limited to Volkswagen, Audi, Mercedes, BMW/Mini, Hyundai, Mazda, Kia and Infiniti.

It is impossible to troubleshoot and airbag system without the trouble code. Trouble code B1448 is a common airbag trouble code on Hyundai Accent vehicles. What is a B1448 trouble code? Codes B1447 and B1448 are related to the Occupant Classification System (OCS). The OCS is used to determine whether a child or an adult is in the passenger seat.

How to check the B1448 airbag light on Hyundai Accent?

If the code is still there. unplug the six terminal connector going to the sensor mat under the passenger seat. Reconnect the battery. With the key in the RUN position check for battery voltage on terminal 1 (red/black wire) and ground terminals 3 & 5 (black wires). Next, check the voltage at terminal 2 in the connector (red/black) wire.

How do you remove the airbag from a Hyundai?

There are three locking pins that you will need to press to release the airbag, but since you can’t really see them, you will need to try for several minutes. Eventually, you will be able to release the airbag from the steering wheel. Disconnect the negative battery terminal.

How much does it cost to replace the airbag on a Hyundai Elantra?

All you need to complete this job is a couple of screwdrivers. How much does it cost to replace the driver’s airbag on a Hyundai Elantra? At the Hyundai dealer, expect to pay between $800 -$2000 to replace the driver’s airbag. That will include the airbag itself and the labor.

What are the problems with the Hyundai airbags?

Hyundai DTC Trouble Codes DTC Description B1335 Right-hand Front Crash Sensor Wrong ID B1346 Driver Airbag Resistance Too High/Low B1346 Driver Airbag Resistance Too High B1347 Driver Airbag Resistance Too High/Low

Where are the airbag codes stored in a Hyundai?

Below you will find common airbag codes that can be stored in your airbag control module after your vehicle was in an accident. The best part of having your Hyundai’s original airbag module reset by MyAirbags is that when you get your airbag control module back and it goes back into the same vehicle that it came out of then it will be plug-n-play.

Do you need a VIN for a Hyundai airbag module?

No additional programming of the VIN is required. This is an alternative to purchasing a new or used airbag module that will need to be taken to the Hyundai dealership to have the new or used airbag control module programmed to your vehicle. Send your airbag control module to MyAirbags and save time, money and not having to deal with a dealership!

How do you turn off the airbag light on a Hyundai?

Turn on the code reader and move the arrows on the menu to the “Erase” function and then press “Enter”. Remove the OBD II code reader from the DLC and start the engine. Look at the instrument panel to make sure the airbag light turned off.

How to turn on the airbag warning light?

If the sensor mat isn’t working properly, trouble codes B1447 and B1448 can set and turn on the Airbag warning light Start by disconnecting the battery terminal from your car battery. Wait for at least 3 minutes for the airbag system to power down. Clear everything from the under the passenger seat.

Is there a problem with the Hyundai Accent air bag light?

See all problems of the 2010 Hyundai Accent . Takata recall: air bag light stays on and car cannot be inspected. Also check engine light stays on. Removed passenger and driver seats to check sensors/wires but did not solve the problem.

Why does the air bag light come on and off while driving?

It has stayed on while driving, except for a short time, on November 14th. Airbag light comes on and off at random, regardless of whether there is a passenger in the seat or not. Car was taken to a Hyundai dealership, and they discovered a seat cushion with a sensor was malfunctioning.

How can I reset the airbag light on my Hyundai?

You can easily reset the airbag light on your Hyundai from home using a handheld pocket scanner. These are also called code readers or code erase tools. Make sure you get the on-board diagnostics II, OBD II, code reader not the OBD I for your Hyundai.

Is the SRS module on a Hyundai Accent bad?

If it is battery voltage, the SRS module is bad. If you get the expected readings, the sensor mat is bad. Hyundai has issued a service bulletin to address a faulty OCS sensor mat on 2006-2011 Hyundai Accent vehicles. Hyundai is extending the warranty on this component for 15 years with unlimited mileage.

How much does it cost to diagnose Hyundai Code p0441?

The cost of diagnosing the P0441 HYUNDAI code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour. When is the P0441 HYUNDAI code detected?

How to check battery voltage on Hyundai Accent?

With the key in the RUN position check for battery voltage on terminal 1 (red/black wire) and ground terminals 3 & 5 (black wires). Next, check the voltage at terminal 2 in the connector (red/black) wire. The reading should be 0 volts or up to 10-volts, but it should NOT be battery voltage.

What is the DTC code for a Hyundai?

In this article, you will find a complete list of Hyundai Trouble Codes. This list contains more than the Hyundai Check Engine Codes. Here you will find Hyundai ABS, Airbag, and Transmission DTC codes. P0244 Turbocharger/Supercharger Wastegate Sol.

What does the code p0441 mean on a Hyundai?

What does this mean? The P0441 code means that the control module has detected a leak in the Evaporative Emission (EVAP). Loose fuel tank filler cap is the most common cause that triggers the P0441 code. What does this mean? When is the code detected? Engine Light ON (or Service Engine Soon Warning Light)

Where are the trouble codes on a Hyundai?

Hyundai Specific Trouble Codes OBD-11 code Fault location P1112 Intake air temperature (IAT) sensor- cir P1114 Engine coolant temperature (ECT) sensor P1115 Engine coolant temperature (ECT) sensor P1118 Throttle motor – malfunction

Which is the best review of a 2011 Hyundai Accent?

Edmunds’ expert review of the Used 2011 Hyundai Accent provides the latest look at trim-level features and specs, performance, safety, and comfort. At Edmunds we drive every car we review, performing road tests and competitor comparisons to help you find your perfect car. Read the full in-depth review of the Used 2011 Accent at Edmunds.

What kind of transmission does the Hyundai Accent have?

As is the case with many small cars, the 2011 Hyundai Accent’s performance depends to a great extent on which transmission you choose. The five-speed manual gearbox makes the car feel reasonably peppy, while the four-speed automatic bogs it down.

What are common reasons my Hyundai Accent has air conditioning problems?

What are common reasons my Hyundai Accent has air conditioning problems? While there are a variety of reasons your Hyundai Accent air conditioning won’t work, the most common 3 are a refrigerant leak, an electrical climate control issue, or a problem with the air conditioning compressor.

How to turn on Max A / C in Hyundai Accent?

To select the MAX A/C, turn the temperature knob to the extreme the left. Air flow is directed toward the upper body and face. In this mode, the air conditioning and the recirculated air position will be selected automatically.

How to change the air intake in a Hyundai Accent?

To change the air intake control position, press the control button. With the recirculated air position selected, air from the passenger compartment will be drawn through the heating system and heated or cooled according to the function selected.

What does p0301 stand for in Hyundai Accent?

P0301 is a common OBDII trouble code that appears in the Hyundai Accent. It stands for: P0301 should be considered a cause for concern, and can be a threat to the drivability your Accent. The one nice thing about P0301 is that it is a cylinder specific misfire code.

Where is the first cylinder on a Hyundai Accent?

An important thing to understand when finding the location of cylinder one is that it’s going to be the first cylinder in the firing order of the vehicle, and not the first cylinder that you might see when looking at the engine. The P0301 Hyundai trouble code will trigger the Accent’s service engine soon light.

Why does my Hyundai Accent have a p0304 code?

The engine is also not firing all of the fuel, so raw fuel is also passing through Cylinder 4 into the exhaust. Mileage may suffer as well when your Accent has P0304 as well. P0304 is a cylinder specific misfire code, which means that Cylinder 4 is misfiring and causing the code.

What’s the misfire code on the Hyundai Accent?

Mileage may suffer as well when your Accent has P0304 as well. P0304 is a cylinder specific misfire code, which means that Cylinder 4 is misfiring and causing the code.

Where is the cylinder 4 on a Hyundai Accent?

An important thing to understand when finding the location of Cylinder 4 is that it’s going to be the 4’th cylinder in the firing order of the vehicle, and not the 4’th cylinder that you might see when looking at the engine. The P0304 trouble code will trigger the Accent’s service engine soon light. The vehicle itself may begin to run rough.

What’s the difference between the 2009 and 2010 Hyundai Accent?

The biggest change for the 2010 Accent is its mileage. All trim levels see at least a 1 mpg bump, and the all-new base trim level, called Blue, gets a large jump versus the 2009 base model. The Blue comes only as a two-door hatchback and gets 28/36 mpg city/highway, versus 27/33 mpg for the base 2009 Accent.

How to choose the best Hyundai Accent lights?

On the other hand, individuality is its only weak point, and you may want to boost it with new, high-quality lights. When it comes to choosing Hyundai Accent lights, there is no other site like CARiD.com.

What does the key reminder chime sound on a Hyundai Accent?

If the driver’s door is opened while the ignition key is left in the ignition switch (ACC or LOCK position), the key reminder warning chime will sound. This helps prevent you from locking your keys in the vehicle. The chime sounds until the key is removed from the ignition switch or the driver’s door is closed.

Are there any accessories for the Hyundai Accent?

Official Hyundai Accent Accessories and Parts available at Hyundai Shop. Like, the Hyundai Accent Cargo Net to hold items securely in the trunk space, the Accent Cargo Mat to protect the interior of your trunk, or the Accent Spare Tire Kit to always have that peace of mind when traveling.

What should I do if my Hyundai Accent warning light is not working?

1. Drive safely to the side of the road and stop. 2. With the engine off, check the engine oil level. If the level is low, add oil as required. If the warning light remains on after adding oil or if oil is not available, call an authorized HYUNDAI dealer.

What kind of mileage does the Hyundai Accent get?

2021 ACCENT: M/T 29 City/39 Hwy/33 Combined MPG, A/T 33 City/41 Hwy/36 Combined MPG. All figures are EPA estimates and for comparison purposes only. Actual mileage may vary with options, driving conditions, driving habits and vehicle’s condition. Please enter a first name. Please enter a last name. Please enter a valid email address.

What to do if your Hyundai Accent brakes don’t work?

Have the vehicle checked by an authorized HYUNDAI dealer as soon as possible. If the both ABS and brake warning lights are on and stay on, your vehicle’s brake system will not work normally during sudden braking. In this case, avoid high speed driving and abrupt braking. Have your vehicle checked by an authorized HYUNDAI dealer as soon as possible.

When do you turn off the airbag in a car?

These cars disable the airbag automatically depending on conditions, for example when the passenger seat is empty. If you can’t deactivate the passenger airbag it is recommended that all children travel in the rear seats. Remember, DO NOT deactivate the front passenger airbag if you’re using a front facing child seat.

Is the air bag light on in my Hyundai Sonata?

Hyundai Sonata: Air bag light is on in my 2007 hyundai sonata. Hyundai Santa Fe: I have a 2008 Hyundai Santa Fe. The air bag I have a 2008 Hyundai Santa Fe. The air bag light has been on – now believe electrical problem. Car has turned on parking lights by itself.

Navigation