How do you reset the oil light on a 2011 Hyundai Sonata?
1 Answer
- Start your engine.
- Press and hold the OK button for five seconds.
- Release it and then press it again once and hold it for a second or two, and the oil light will go away.
How to reset Hyundai Sonata service required light?
Steps by step tutorial on how to reset the oil service required spanner/wrench maintenance indicator message light on Hyundai Sonata from the year 2014-2015-2016-2017-2018-2019-2020. Close all doors, Gear to the park position. Start the car engine.
When did the first Hyundai Sonata come out?
The first generation Sonata, which was introduced in 1985, was a facelifted Hyundai Stellar with an engine upgrade and was withdrawn from the market in two years due to poor customer reactions. While the nameplate was originally only sold in South Korea, the second generation of 1988 was widely exported.
What is the turbocharger control code on a sonata?
12-EM-003 or CAN-11-20-007; On some 2011-2012 model year Sonata vehicles equipped with the 2.0T (turbo-GDI) engine, the malfunction indicator light may illuminate with DTC P2562 Turbocharger Boost Control Position Sensor “A” Circuit.
How to clean and relearn Hyundai throttle body?
1. Remove the breather hose and air intake hose. 2. With ignition key off disconnect the ETC connector from the throttle body. 3. Remove the 4 ETC throttle body mounting bolts and then pull out the ETC throttle body away from the intake manifold.
How to repair Hyundai Sonata engine control module?
Repair procedures Hyundai Sonata YF 2011-2014 Service Manual / Engine Control/Fuel System / Engine Control System / Engine Control Module (ECM). Repair procedures When replacing the ECM, the vehicle equipped with the immobilizer must be performed procedure as below. 1) Perform “ECM Neutral mode” procedure with GDS.
What do you need to know about Hyundai Sonata?
Hyundai Sonata: Engine Control Module (ECM). Repair procedures – Engine Control System – Engine Control/Fuel System Hyundai Sonata: Engine Control Module (ECM). Repair procedures Hyundai Sonata YF 2011-2014 Service Manual / Engine Control/Fuel System / Engine Control System / Engine Control Module (ECM).
How do you repair a Hyundai Sonata starter?
1. Remove the engine cover. 2. Disconnect the battery negative terminal (A). 3. Remove the air duct (B). 4. Remove the air cleaner assembly. Disconnect the breather hose (A), the intensifier hose (B) and brake booster vacuum hose (C). Disconnect the air intake hose (D) and then remove the air cleaner assembly (E). 5.
How to change the VIN on a Hyundai Sonata?
1. Select “VIN Writing” function in “Vehicle S/W Management”. 2. Select “Write VIN” in “ID Register”. 3. Input the VIN. Before inputing the VIN, confirm the VIN again because the programmed VIN cannot be changed. 4.