Are there different types of serpentine belts?
There are two belts you need to be familiar with when talking about car maintenance — the serpentine belt and the timing belt. The serpentine belt winds through your engine and carries power to several key components, including the alternator, air conditioning, and power steering pump.
How to replace a serpentine drive belt on a Hyundai Elantra?
This guide applies to most Hyundai vehicles with a four-cylinder engine found on Accent, Santa Fe, Sonata, Veloster, and Elantra. Photos and video clips are from a 2016 Hyundai Elantra. Disconnect the negative battery terminal. Loosen the alternator bolts. There is a 12 mm and 14 mm bolt that needs to be loosened.
Can a serpentine belt on a Hyundai overheat?
Since the belt turns the alternator, water pump and power steering in your car, failure of the belt can cause the engine to overheat, be hard to steer and allow the battery to discharge very rapidly. Inspect the belt often. Every time you change the oil you should check it. Locate the tensioner pulley on the front of your engine.
Is the serpentine belt the same as the drive belt?
Remove the serpentine/drive belt from the pulleys. Install the serpentine belt in reverse order. Ensure that the belt is routed properly and that the belt is sitting correctly in all the pulleys. The serpentine belt is also called the drive belt, poly v-ribbed belt, or accessory belt.
How do you remove a belt from a tensioner pulley?
Place a socket and ratchet on the bolt in the center of the tensioner pulley and move the ratchet counterclockwise to relieve the tension on the belt. Slide the old belt off the pulleys and slowly let the tension back on the tensioner.
How do you change serpentine belt on Hyundai?
The tensioner looks like the other pulleys but is mounted on a spring loaded arm. Place a socket and ratchet on the bolt in the center of the tensioner pulley and move the ratchet counterclockwise to relieve the tension on the belt.
What to do if serpentine belt does not work?
If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. What’s up V-nation! Thank you for tuning in to my channel.
Place a socket and ratchet on the bolt in the center of the tensioner pulley and move the ratchet counterclockwise to relieve the tension on the belt. Slide the old belt off the pulleys and slowly let the tension back on the tensioner.
What happens if the power steering belt fails?
If the belts become damaged or worn, it can fail or break while you are driving the car. Since the belt turns the alternator, water pump and power steering in your car, failure of the belt can cause the engine to overheat, be hard to steer and allow the battery to discharge very rapidly. Inspect the belt often.