What are the rules for minimum floor clearances?
The rules for minimum clearances are set out in Building Code Acceptable Solution E1/AS1 and NZS 3604. Getting the floor level wrong can lead to on-going moisture problems.
Why does ground clearance differ from official specs?
In a nutshell, this is the distance between the lowermost point of the car and the road surface in an unladen condition. This is the reason why the actual measurement might slightly differ from the official specs. Essentially, all the debate in the automotive community boils down to the following two controversies.
How much ground clearance do you need for a car?
And ground clearance comparison of cars gets really hot when it comes to assessing a similar category of autos. That is when every inch gets counted. The above table shows the results for the minimum ground clearance thresholds identified for the passenger vehicles based on the minimum desirable grades from the GDGCR.
What should the clearance be for a kitchen range?
Kitchen Stove, or Range, Clearances illustrate the minimum safe and efficient measurements for a functional range center. Concerned primarily with the space in front of the stove, a minimum ‘Work Zone’ of 40” (102 cm) should be provided to accommodate the human body and the various movements and motions associated with cooking.
How much clearance do you need for a cooking surface?
Cooking Surface Clearance: Allow 24 inches of clearance between the cooking surface and a protected noncombustible surface [e.g., a range hood] above it. At least 30 inches of clearance is required between the cooking surface and an unprotected/combustible surface [e.g., cabinetry] above it.
What’s the minimum clearance for an upright freezer?
General List of Minimum Clearance Requirements. Upright Freezers (9 cubic feet and larger): 3 inches of clearance on top. 3 inches of clearance at the back. 3 inches of clearance on each side. Refrigerators: ¾ to 1 inch of clearance on each side. 1 inch on the top (this is above the case).
What’s the minimum depth for a work surface?
321) □ Depth underneath work surface – one of the following must be checked: 1. Preferred: 17.3 inches or greater at the level of the knee and 23.6 inches or greater at level of the feet. (1, pg. 80) 2. Minimum: 17.3 inches at the level of the knee and 23.6 inches at level of the feet (1, pg.
How big of a work surface do I Need?
79); at least 24 inches deep for non-computer work surfaces (1, pg. 80) □ Width underneath work surface – one of the following must be checked: 1. Preferred: 20.5 inches wide or greater (1, pg. 80); 30 inches wide or greater for ADA (5, pg.