Why does my Hyundai Sonata go from low to high beams?
It’s obviously a bad connection within the blinker stalk, causing the light mode to change on its own when turning. Headlights flicker and/or switch from low to high beams when using turn signal. The turn signal stalk contains the on/off/auto switch for the headlights as well as the high/low beam selection.
Why do high beam headlights work but low beams don’t?
Most headlight systems are also designed with a relay that switches the power between low beam and high beam headlights. If this relay goes bad, it could allow power to the high beams, but not the low beams. 1. Headlight Bulbs This is the most common reason we see for why a car’s high beam headlights work but the low beams don’t.
Do you need to replace both high and low beams?
Some vehicles use a single bulb for both high and low beams while others do not. If the high beam on the same side is also out, it may be one bulb. You do not need to purchase specific bulbs for each side, but identifying which is the blown out bulb will help you to replace it without having to start the vehicle again.
What’s the problem with the headlight switch on a Hyundai Sonata?
Headlight Switch problem of the 2014 Hyundai Sonata 1 Failure Date: 10/18/2020 The headlamp switch appears to have a malfunction. Touching it to turn on the blinker or the bright lights can cause the headlights and dashboard lights to flicker.
Most headlight systems are also designed with a relay that switches the power between low beam and high beam headlights. If this relay goes bad, it could allow power to the high beams, but not the low beams. 1. Headlight Bulbs This is the most common reason we see for why a car’s high beam headlights work but the low beams don’t.
What to do if your low beams don’t work?
Either way, if your low beams aren’t working but your high beams are, the first things we check are the bulbs. If you’re thinking of replacing the headlight bulbs yourself, make sure you’re familiar with the correct installation procedure for the type of bulb you’re replacing.
Is it safe to drive with high beams on?
No one wants to be driving along at night and have their headlights go out. In many cases, the high beams will still work when the regular headlights stop, but it’s just not safe to drive around with your high beams potentially blinding other drivers.
Why is my car’s high beam light not working?
Make sure to use the right high beam bulb for your vehicle. On some vehicles, particularly those with HID headlights or solid-state circuit protection (Zener diodes or high beam circuit breakers) installing the wrong bulb might result in intermittent headlight operation or no high beams at all.
What can cause a low beam headlight to be dim?
If it is, use a voltmeter to see how much power, if any, is reaching the headlights. If there is no power reaching them, there is a break in the wiring somewhere between the fuse panel and the headlights themselves. Thanks! What can cause the light to be dim except when on the high beam setting?
What to do when your low beam headlight blows out?
You can often tell when a headlight blows out while you’re driving, but confirm which bulb has actually blown out by leaving your headlights on and getting out of the vehicle to check. Then get back in your vehicle and turn on your high beams. Some vehicles use a single bulb for both high and low beams while others do not.
It’s obviously a bad connection within the blinker stalk, causing the light mode to change on its own when turning. Headlights flicker and/or switch from low to high beams when using turn signal. The turn signal stalk contains the on/off/auto switch for the headlights as well as the high/low beam selection.
Make sure to use the right high beam bulb for your vehicle. On some vehicles, particularly those with HID headlights or solid-state circuit protection (Zener diodes or high beam circuit breakers) installing the wrong bulb might result in intermittent headlight operation or no high beams at all.
If it is, use a voltmeter to see how much power, if any, is reaching the headlights. If there is no power reaching them, there is a break in the wiring somewhere between the fuse panel and the headlights themselves. Thanks! What can cause the light to be dim except when on the high beam setting?
You can often tell when a headlight blows out while you’re driving, but confirm which bulb has actually blown out by leaving your headlights on and getting out of the vehicle to check. Then get back in your vehicle and turn on your high beams. Some vehicles use a single bulb for both high and low beams while others do not.
Are there any recalls on the Hyundai Sonata?
2011 Hyundai Sonata defect in the light stem switch that causes headlights and dash lights to flicker the consumer stated he began to experience occasional episodes of flickering headlights, especially when switching between high and low beam. Takata recall – in September 2014 my battery were going dead.
Is it possible to fix a bad low beam headlight?
Fortunately, fixing a bad low beam is a straight forward process in the majority of vehicles that can be done by most people without just a few hand tools. If replacing your headlight bulb does not work, there may be an electrical issue in your vehicle that should be addressed by a professional. Identify a blown out bulb.
Headlight Switch problem of the 2014 Hyundai Sonata 1 Failure Date: 10/18/2020 The headlamp switch appears to have a malfunction. Touching it to turn on the blinker or the bright lights can cause the headlights and dashboard lights to flicker.
What kind of light bulb does a Hyundai Sonata use?
Disconnect the power cord from the bulb base at the back of the assembly. Push the bulb spring on the assembly to remove the light bulb. Pull the old bulb out and place the new bulb in. The low-beam lights use H7 bulbs. The high-beam lights use H1 bulbs.
2011 Hyundai Sonata defect in the light stem switch that causes headlights and dash lights to flicker the consumer stated he began to experience occasional episodes of flickering headlights, especially when switching between high and low beam. Takata recall – in September 2014 my battery were going dead.
Disconnect the power cord from the bulb base at the back of the assembly. Push the bulb spring on the assembly to remove the light bulb. Pull the old bulb out and place the new bulb in. The low-beam lights use H7 bulbs. The high-beam lights use H1 bulbs.
What does the EBD warning light on a Hyundai Sonata mean?
If the ABS warning light or EBD warning light is on and stays on, the speedometer or odometer/tripmeter may not work. In this case, have your vehicle checked by an authorized HYUNDAI dealer as soon as possible. The driver’s seat belt warning light and chime will activate to the following table when the ignition switch is in “ON” position.