What to do when coupling power steering to steering column?
When refitting the power steering motor to the steering column, ensure the coupling is correctly lined up and that the power steering motor is pulled down evenly onto the steering column to assure proper alignment. Carry out a steering angle sensor calibration if required and road test vehicle to ensure proper steering functionality.
Why is my power steering coupler making a clicking noise?
This bulletin describes the procedure to replace the flexible rubber coupling in the MDPS (motor driven power steering) assembly to address a minor clicking or thud type noise when turning the steering wheel in some models. There are no steering performance issues associated with this Version.
Do you need to remove the steering column?
Remove the 3 or 4 (Depending on model) T30 Torx bolts that fix the motor to the steering column and carefully remove the power steering motor. In some instances, this repair can be done in-situe, in others the steering column may need to be removed from the vehicle in order to properly clean and realign the power steering motor and steering column.
What causes the power steering to shut down?
This one seems to state that if the angle on the wheel is off, it can cause the rest of the power steering system to shut down. EHPS system that controls the motor pump and steering force according to steering speed and SAS signal This HECU seems to receive signals from the system and control the pressure supplied to the wheel cylinders
When refitting the power steering motor to the steering column, ensure the coupling is correctly lined up and that the power steering motor is pulled down evenly onto the steering column to assure proper alignment. Carry out a steering angle sensor calibration if required and road test vehicle to ensure proper steering functionality.
When do you need a steering flex coupler replacement?
If your vehicle is producing any of the symptoms above, or you suspect that your steering flex coupler may be having an issue, have the vehicle inspected by a professional technician, such as one from YourMechanic, to determine if the car needs a flex coupler replacement.
Remove the 3 or 4 (Depending on model) T30 Torx bolts that fix the motor to the steering column and carefully remove the power steering motor. In some instances, this repair can be done in-situe, in others the steering column may need to be removed from the vehicle in order to properly clean and realign the power steering motor and steering column.
How does a flex coupling steering damper work?
It is a rubber disc that is designed to absorb and dampen vibrations. As a vehicle is driven, vibrations from contact with the ground are transferred through the vehicle’s steering system, up to the steering wheel. It is the job of the flex coupling to absorb these vibrations, which could otherwise cause driver fatigue, and even steering issues.