How do you reset the throttle body on a Hyundai Elantra?

How do you reset the throttle body on a Hyundai Elantra?

Registered

  1. Turn on ignition but don’t start the car. ( KOEO)
  2. Depress gas pedal to the floor for at least 5 seconds.
  3. Turn ignition off while pedal is still depressed.
  4. Release gas pedal.
  5. Wait a few minutes & restart the car. ( Not sure how long of a wait is necessary, if it all)

Do you need a Hyundai throttle body relearn?

Hyundai vehicles that exhibit a no start, rough idle, fluctuating idle, or Hyundai code may require a Hyundai throttle body cleaning and relearn procedure. The procedures described here are for the electronic throttle body used on the Theta 2.0L and 2.4L engines in the vehicles listed below.

How long does it take for GM throttle body to relearn?

If you don’t do a relearn procedure, the PCM will “hunt” for a new baseline idle. It will eventually learn it on its own, but it may take over a week of driving, during which time you will experience high and low idle speeds and possibly rough idle. 1) Start the engine and let it idle in park for 3 minutes.

How to relearn Nissan spectra electronic throttle body?

Congratulations on installing your brand-new Spectra Premium electronic throttle body. In this video, we’ll be going through the required relearn instructions for your vehicle. But before we do that, there’s a few things we need to look at. Firstly, check the vehicle for any pre-existing trouble codes and make the appropriate repairs.

How to do throttle body re-Learn Chevy Malibu?

1) Start the engine and let it idle in park for 3 minutes. During that period the idle may be higher idle than normal. 2) After 3 minutes, turn the engine off and leave it off for 60- seconds. 3) Start the engine again and let it idle in park for 3 minutes one more time. During these run periods you may see a check engine light.

Hyundai vehicles that exhibit a no start, rough idle, fluctuating idle, or Hyundai code may require a Hyundai throttle body cleaning and relearn procedure. The procedures described here are for the electronic throttle body used on the Theta 2.0L and 2.4L engines in the vehicles listed below.

If you don’t do a relearn procedure, the PCM will “hunt” for a new baseline idle. It will eventually learn it on its own, but it may take over a week of driving, during which time you will experience high and low idle speeds and possibly rough idle. 1) Start the engine and let it idle in park for 3 minutes.

What happens when you replace the throttle body?

If you replace the throttle body, the PCM won’t know and will continue to use the adaptive settings as if the carbon buildup is still in place. If you don’t do a relearn procedure, the PCM will “hunt” for a new baseline idle.

1) Start the engine and let it idle in park for 3 minutes. During that period the idle may be higher idle than normal. 2) After 3 minutes, turn the engine off and leave it off for 60- seconds. 3) Start the engine again and let it idle in park for 3 minutes one more time. During these run periods you may see a check engine light.