What does a yellow triangle mean on my dash?
Assuming for a moment that is is a yellow triangle with an exclamation mark, it is simply to alert you to a less severe fault in conjunction with a warning message. To be certain what it is, you need to read your owner’s manual. (
What are triangle signs?
Triangle signs – usually white with a red border – are here to let you know that you’re approaching a hazard or a place to stop. They will usually point upwards and feature an image of the hazard: merging traffic, a junction on a bend, a slippery road or a zebra crossing are all examples of common warning road signs.
What happens when the BSD warning is canceled?
If any of these conditions occur, the light on the BSD switch and the system will turn off automatically. When the BSD canceled warning message is displayed in the cluster, check to make sure that the rear bumper is free from any dirt or snow in the areas where the sensor is located.
Where is the warning triangle on the dash?
HOWEVER, new concern is while driving at normal highway speeds in light to moderate traffic the center dash screen (the one between the speedo and tach) illuminated a orange warning triangle with the exclamation point.
Why is there a yellow triangle on my systray Network icon?
Hands up if you’ve seen the dreadful “yellow triangle” on your systray network icon at least once. The meaning of that is as simple as the popup label appearing on mouse hover: the system is connected to a network, but there’s no internet access.
What to do if Kia Cee’d warns about blind spot detection?
If the system still does not operate normally have your vehicle inspected by an authorized Kia dealer. If there is a problem with the BSD system, a warning message will appear and the light on the switch will turn off. The system will turn off automatically.We recommend that you have your vehicle inspected by an authorized Kia dealer.
What does the yellow triangle on my ADT DSC alarm system mean?
That means if you see this symbol, your system has an issue that you need to resolve. A trouble light could mean 1 of 8 problems. To find out what the problem is, you can simply press *2 on your keypad. After pressing this on the keypad, your zone lights should light up, communicating any trouble areas.
How to tell when BSD has been deactivated?
Upon scrolling to the service menu to get the specifics it shows BSD DEACTIVATED with a large circular orange icon and the slash thru it – the 2 little cars icon and the wavy lines between them is also on the screen , but they are illuminated in the white- sh color of the normal dash texts.
HOWEVER, new concern is while driving at normal highway speeds in light to moderate traffic the center dash screen (the one between the speedo and tach) illuminated a orange warning triangle with the exclamation point.
What does the yellow triangle on my alarm mean?
A yellow triangle on your DSC ADT Alarm system is also known as a “trouble light.” That means if you see this symbol, your system has an issue that you need to resolve. A trouble light could mean 1 of 8 problems.