Why are my Hyundai Elantra high beams not working?
I have a 2019 Hyundai Elantra Value Edition and found this out, which looking into another issue. The headlights use a 905/HB3 bulb. His is a single filament bulb and there for will only illuminate at one setting. Because of this, I couldn’t figure out why brights would work at all.
Why are my high beam headlights not working?
In the case of high-intensity discharge (HID) headlights, or Xenon headlights, there’s an additional component. To get the xenon and salts to plasma state, the HID generator bumps the voltage up to 30,000 V, then stabilizes around 90 V when the bulb is in operation. If the generator fails, the bulb won’t light.
What kind of light bulb does Hyundai Elantra use?
They aren’t that expensive, so they won’t hurt Your bank account. I have a 2019 Hyundai Elantra Value Edition and found this out, which looking into another issue. The headlights use a 905/HB3 bulb. His is a single filament bulb and there for will only illuminate at one setting.
What is the fuse box diagram for a Hyundai Elantra?
Electro Chromic Mirror, A/V & Navigation Head Unit, Rear Combination Lamp (In) LH/RH, M/T – Back-Up Lamp Switch, BCM, Instrument Cluster Oxygen Sensor (UP/DOWN), Canister Close Valve, Variable Intake Solenoid Valve, Oil Control Valve #1 / #2, Purge Control Solenoid Valve, C/FAN LO Relay, C/FAN HI Relay
I have a 2019 Hyundai Elantra Value Edition and found this out, which looking into another issue. The headlights use a 905/HB3 bulb. His is a single filament bulb and there for will only illuminate at one setting. Because of this, I couldn’t figure out why brights would work at all.
How are the headlights on a Hyundai Elantra?
The headlights on low beam have a black line across and only about 25 yard visibility, on high beam they are a very dull yellow and the visibility out is about 50 to 75 yards. The level of light is so low that you cannot see anything in the roadway.
Where are the low beams on a 2011 Hyundai Santa Fe limited?
I found out that there is actually a headlight relay under the driver’s side dash that, when it is bad, will cause there to be three highs at the headlights. You can find it between the side of the car and where the hood latch is located. I have the identical problem on my son’s 2011 Hyundai Santa Fe Limited. Low beams suddenly stopped working.
Are there any problems with the Hyundai Elantra?
Hyundai Elantra owners have reported 69 problems related to headlights (under the exterior lighting category). The most recently reported issues are listed below. Also please check out the statistics and reliability analysis of Hyundai Elantra based on all problems reported for the Elantra.
Where can I repair a 2010 Hyundai Elantra?
Tl the contact owns a 2010 Hyundai Elantra. The contact received notification of NHTSA campaign number: 20v061000 (service brakes, hydraulic) and the vehicle was repaired at garvey Hyundai located at 271 tom miller rd, plattsburg, NY 12901, (518)-324-7007, however, after the repair was performed the vehicle had to be jump started.
How many miles does a Hyundai Elantra have?
The manufacturer had been informed of the failure. The failure mileage was approximately 70,000. Tl the contact owns a 2010 Hyundai Elantra.
Why are my headlights not working in high beam?
If just one bulb fails to work in either high beam mode or low beam mode, it may be the bulb. Most headlight failures that are limited to just high or low beams are related to a relay or the high beam control switch.
How does a high beam light bulb work?
Get familiar with the fuses and relays that control your headlights. The headlight switch usually doesn’t control the headlight bulbs directly, but through one or more relays. The headlight switch powers a relay, which powers the headlight bulb. This protects the headlight switch from the high current used by the high beam headlights.
Why do high beam headlights work but low beams don’t?
Most headlight systems are also designed with a relay that switches the power between low beam and high beam headlights. If this relay goes bad, it could allow power to the high beams, but not the low beams. 1. Headlight Bulbs This is the most common reason we see for why a car’s high beam headlights work but the low beams don’t.
They aren’t that expensive, so they won’t hurt Your bank account. I have a 2019 Hyundai Elantra Value Edition and found this out, which looking into another issue. The headlights use a 905/HB3 bulb. His is a single filament bulb and there for will only illuminate at one setting.
Get familiar with the fuses and relays that control your headlights. The headlight switch usually doesn’t control the headlight bulbs directly, but through one or more relays. The headlight switch powers a relay, which powers the headlight bulb. This protects the headlight switch from the high current used by the high beam headlights.
Where are the fuses located on a Hyundai Elantra?
Vehicle | Hyundai / Elantra / › 2011-2016. In model years 2001-2016 Hyundai Elantra the main fuses are located in the engine bay. Another fuse box is located under the dashboard on the driver’s side. This applies to Hyundai Elantra model years 2011, 2012, 2013, 2014, 2015, 2016.