What to do if your Santa Fe radiator fan is not working?

What to do if your Santa Fe radiator fan is not working?

The first thing that you would want to do is locate the fuse for your Santa Fe’s radiator fan and make sure that it hasn’t blown. If it is blown, replacing the fuse will only solve the problem for a very limited period of time. Unless the wiring issue is fixed, the fuse will blow again.

What kind of Fuse does a Hyundai Santa Fe have?

Hyundai Santa Fe (2004 – 2006) – fuse box diagram Year of production: 2004, 2005, 2006 Engine compartment Description Ampere rating [A] Protected components FUSIBLE LINK ALT 120 Generator B+ 50 Tail lamp relay, Fuse 11~17, Power connector IGN 50 Start relay, Ignition switch BLR 40 A/C Fuse, Blower relay ABS.1 30 ABS control module, …

What does it mean when your radiator fan is not working?

This is what we call a blown fuse. A blown fuse is no big deal, and changing one does not cost a lot of money. If your car’s radiator fan is non-functional, check your car’s user manual and locate the fuse for the radiator fan controller or the fan.

What happens when a fuse is blown on a car?

A fuse supports almost everything electrical in a car. If there is an electrical surge going towards a piece of electronic equipment, the fuse cuts the electric supply to that particular equipment saving it from destruction. This is what we call a blown fuse. A blown fuse is no big deal, and changing one does not cost a lot of money.

The first thing that you would want to do is locate the fuse for your Santa Fe’s radiator fan and make sure that it hasn’t blown. If it is blown, replacing the fuse will only solve the problem for a very limited period of time. Unless the wiring issue is fixed, the fuse will blow again.

Hyundai Santa Fe (2004 – 2006) – fuse box diagram Year of production: 2004, 2005, 2006 Engine compartment Description Ampere rating [A] Protected components FUSIBLE LINK ALT 120 Generator B+ 50 Tail lamp relay, Fuse 11~17, Power connector IGN 50 Start relay, Ignition switch BLR 40 A/C Fuse, Blower relay ABS.1 30 ABS control module, …

Why is the radiator fan relay not working?

If you don’t get ground on pin 3, the ECM is not activating the radiator relay. That can be caused by a faulty engine coolant temperature sensor or a wiring problem between the ECM and pin 3. If you do find ground on pin 3, jumper across pins 1 & 2 in the socket. If the radiator fan runs, then the radiator fan relay is bad. Replace it.

How can you tell if a Hyundai radiator fan is working?

If you see battery voltage, that confirms the engine control relay is providing power to the control coil side of the relays. With the key in RUN position, turn the AC ON. Then check for ground on pin 1 in the condenser fan relay socket. If you detect good ground, the ECM is operating properly

When did the Hyundai Santa Fe come out?

In this article, we consider the first-generation Hyundai Santa Fe (SM), produced from 2001 to 2006. Here you will find fuse box diagrams of Hyundai Santa Fe 2004, 2005 and 2006, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.

Why is my radiator fan not working on my Toyota Camry?

If you do have low coolant, don’t fill it up until the engine has cooled off. Adding coolant to a radiator dry enough not to trigger the engine temp sensor can cause problems from drastic temperature change. Let it cool down first. Like any other clutch, a fan clutch will wear out over time.

Why is the fan not running in my Hyundai Santa Fe?

If you mean the fan inside the passenger area, then there is a wiring problem in the controls someplace like the switch or a resistor. The heater/A/C fan should always run regardless of the temperature as long as you turn the switch on. 3 people found this helpful.

Why is the radiator not working on my Santa Fe?

If the radiator fan is not working, it’s a serious problem. Just because the radiator fan is not on does not mean that it is not working. They are designed to only run when needed. If your Santa Fe is running hot, and the fan is not running we’ve laid out the most common causes of this issue below.

When to turn off cooling fan in Santa Fe?

If the cooling fan in the engine compartment, that should never come on when you start a car until the engine coolant temperature comes above a predetermined temp, usually between 190 and 210 degrees. Then it comes on just long enough to drop the temp down and turns off.

Is it illegal to replace refrigerant on a Hyundai Santa Fe?

Depending on location, it may be illegal for a technician to replace refrigerant without updating the A/C system to handle the newest type. See what others are asking about their Hyundai Santa Fe.