What is USP water for injection?
Sterile Water for Injection, USP, is sterile, nonpyrogenic, distilled water in a single dose container for intravenous administration after addition of a suitable solute. It may also be used as a dispensing container for diluent use. No antimicrobial or other substance has been added.
What is the TOC limit for purified water?
500 µg
6. What is the total organic carbon (TOC) limit for Purified Water and Water for Injection? There is a “target limit response” of 500 µg of Carbon/L. The true limit is the response of the TOC measurement system to a 500 µg Carbon/L (prepared from sucrose) solution, Rs, corrected for the response to reagent water, Rw.
What happens if you inject sterile water?
Sterile water for injection is 0 mOsm/L, which can be fatal. It should never be given intravenously to patients. PA-PSRS and other medication error reporting pro- grams have received reports of events involving the IV administration of sterile water to patients.
What are the different types of water for injection?
USP WFI may be made only by distillation or reverse osmosis….THE 8 TYPES OF WATER ARE:
- Non-potable.
- Potable (drinkable) water.
- USP purified water.
- USP water for injection (WFI)
- USP sterile water for injection.
- LUSP sterile water for inhalation.
- USP bacteriostatic water for injection.
- USP sterile water for irrigation.
What is the pH for sterile water for injection IP?
5.0 to 7.0
Sterile Water for Injection, USP is a sterile, nonpyrogenic, solute-free preparation of distilled Water for Injection. It is for use only as a sterile solvent or diluent vehicle for drugs or solutions suitable for parenteral administration. The pH is 5.5 (5.0 to 7.0).
What is Demin water used for?
Demineralized water is often used to sanitize containers and equipment. It is also used in certain food processing applications, although membrane filtration is usually the technology used so organic material, bacteria, viruses, etc., can be eliminated.
What is water R solution?
R-Water is simple. Our TK60 disinfecting solution is 99.98 percent water and only . 02 percent HOCl, a highly effective germ killer.” From an outcomes standpoint, R-Water is disinfecting surfaces with a shorter contact time than traditional chemicals.
Can water for injection be given intramuscular?
It is intended for use as an irrigation fluid and not for intravenous administration or administration by other, parenteral routes (e.g., subcutaneous or intramuscular) [see WARNINGS AND PRECAUTIONS]. Sterile Water for Irrigation is not potable water and is not intended for oral administration.
When to reduce the frequency of water testing?
The reasoning is that this frequency depends on the stability of the Total Organic Carbon (TOC) instrument response and other factors associated with the water quality and risk. If the TOC of a quality water system is very low, say <20 ppb, then many opt to reduce the frequency of testing due to less risk.
What kind of water do you use for injections?
THE 8 TYPES OF WATER ARE: 1 Non-potable 2 Potable (drinkable) water 3 USP purified water 4 USP water for injection (WFI) 5 USP sterile water for injection 6 LUSP sterile water for inhalation 7 USP bacteriostatic water for injection 8 USP sterile water for irrigation More
When to use sterile water for fluid replacement?
Sterile Water for Injection, USP is used for fluid replacement only after suitable additives are introduced to approximate isotonicity and to serve as a vehicle for suitable medications. INDICATIONS AND USAGE Sterile Water for Injection, USP is indicated in the aseptic preparation of parenteral solutions.
What is the pH of water for IV injection?
For IV injection, add sufficient amount to a solute to make an approximately isotonic solution. pH 5.0 to 7.0. Water for Injection, USP is chemically designated H2O.