Why does my car not start after replacing the timing belt?
When replacing timing belt or chain or cylinder head often the fuel injectors will need to be removed or the fuel line will need to be disconnected. As a result it will take some time to build fuel pressure. Also, check all your connections. If the car has good compression, spark, and fuel it should start.
What causes the ignition timing to go off?
If it is pointing at another tower, then you got the cam timing off, which in turn will throw off the ignition timing. One more thing, if you did not rotate the engine two full turns after securing the tensioner and double checking the cam timing, you could be a couple of teeth off and that will make it hard to impossible to start.
Why does my Honda Accord not crank up?
I just did the timing belt change in a Honda 2007 V6 Accord. I thought I aligned the belt, but I guess I didn’t. Now it won’t cranks but won’t start. How do I fix the timing issue? mark on Crank is facing 9:00, front cam has #1 at TDC rear cam mark is at 9:00. What do I need to do?
Can a crank and cam sensor be replaced?
I replaced both the cam and crank sensor and car still will not start but if I unplug the crank sensor it starts up and runs like crap. I can not figure out what to do next. My car has 91000 miles. My car has an automatic transmission. You should check to see if your vehicle has jumped timing.
What to do if your car wont start after replacing timing belt?
If these checks don’t yield any results, then you should consider contacting a professional technician, such as one available from YourMechanic, to diagnose the no start condition. The statements expressed above are only for informational purposes and should be independently verified.
I just did the timing belt change in a Honda 2007 V6 Accord. I thought I aligned the belt, but I guess I didn’t. Now it won’t cranks but won’t start. How do I fix the timing issue? mark on Crank is facing 9:00, front cam has #1 at TDC rear cam mark is at 9:00. What do I need to do?
How to replace timing belt on Honda 7th gen?
DIY: Timing Belt Replacement – 7th Gen Honda Forum – The #1 Community for… You have the timing belt off by 1 or 2 teeth at most. This is entirely possible if you pulled the “grenade pin” off the tensioner too early or if you didn’t replace the tensioner and had to move it out of the way but couldn’t keep it locked down.
Why is the timing off on my 2007 Accord?
The OP indicated in their comment that they didn’t maintain timing in the process of replacing the timing belt. Since the 2007 Accord V6 has an interference engine, attempting to crank the engine over with the timing off will result in mechanical damage, which would explain why it is running roughly.
When replacing timing belt or chain or cylinder head often the fuel injectors will need to be removed or the fuel line will need to be disconnected. As a result it will take some time to build fuel pressure. Also, check all your connections. If the car has good compression, spark, and fuel it should start.
Why is my car turning over but not cranking?
Replaced it today, and the car is still turning over but not cranking. The timing is set right, its getting gas, and its getting fire. What else could be causing it to turn over but not crank? Any help would be appreciated. Does it have compression?
If it is pointing at another tower, then you got the cam timing off, which in turn will throw off the ignition timing. One more thing, if you did not rotate the engine two full turns after securing the tensioner and double checking the cam timing, you could be a couple of teeth off and that will make it hard to impossible to start.
Why does my car not start when I crank the engine?
If the engine doesn’t crank, or makes an unusual noise when cranking, you may have a starting system problem. The car’s security system may have made an error that disabled the fuel or ignition system, or the chip in the key may have failed.
What to look for when your engine won’t start?
Check for a blown fuse that may be preventing a circuit from working properly, like the fuel injection or computer system. To operate efficiently, an internal combustion gasoline engine needs a good spark, the right amount of fuel, and good compression (a healthy mechanical condition).
When do you need to replace spark plugs?
If you haven’t replaced the spark plug wires in more than three years, your wires may be worn. Also, check your car owner’s manual or vehicle repair manual for the interval schedule for the spark plugs. Your may need to service (gap check and adjustment) or replace the plugs.
If the engine doesn’t crank, or makes an unusual noise when cranking, you may have a starting system problem. The car’s security system may have made an error that disabled the fuel or ignition system, or the chip in the key may have failed.
Check for a blown fuse that may be preventing a circuit from working properly, like the fuel injection or computer system. To operate efficiently, an internal combustion gasoline engine needs a good spark, the right amount of fuel, and good compression (a healthy mechanical condition).
Why does my car not start when I push the start button?
False input or lack of input from sensors like the crankshaft position sensor (CKP) or camshaft position sensor (CPS) can prevent the engine from starting. Also, a bad throttle position sensor (TPS) may cut off the spark to the cylinders.