What should I use to clean my Hyundai throttle body?
Hyundai throttle body cleaning may be indicated if you have the following symptoms: To clean the Hyundai electronic throttle body, purchase an aerosol can of throttle body cleaner and use a soft cloth. The throttle body must be removed from the vehicle, so it’s best to purchase a throttle body gasket as well. 1.
When to clean the throttle body of a car?
This affects your fuel consumption in a negative way. While there is no set mileage when it comes to the lifespan of the throttle body, it is suggested that you give it a thorough cleaning at about 75,000 miles. Cleaning the throttle body allows your car to operate more smoothly and it helps increase its lifespan.
How to reset throttle body calibration [ step by step guide ]?
Make sure that the accelerator pedal is fully released. Turn ignition switch “ON” and wait at least 2 seconds. Turn ignition switch “OFF” wait at least 10 seconds. Turn ignition switch “ON” and wait at least 2 seconds. Turn ignition switch “OFF” wait at least 10 seconds.
What happens when a throttle body sensor goes bad?
In the case of the throttle body (and related sensor), when this happens it causes false information to be relayed to the car’s computer, resulting in faulty corrections to the air-fuel mixture. You may notice a switch into “limp-home” mode, where power to the car’s engine power is reduced and throttle operation is limited.
Hyundai throttle body cleaning may be indicated if you have the following symptoms: To clean the Hyundai electronic throttle body, purchase an aerosol can of throttle body cleaner and use a soft cloth. The throttle body must be removed from the vehicle, so it’s best to purchase a throttle body gasket as well. 1.
Do you have to remove the throttle body?
The throttle body must be removed from the vehicle, so it’s best to purchase a throttle body gasket as well. 1. Remove the breather hose and air intake hose.
How to learn the throttle in a Hyundai?
The battery must read above 10-volts and engine temperature must be above 41.5 degrees for learning to complete successfully. 1) Turn the ignition key ON for at least 10 seconds and then OFF for at least 10 seconds. This procedure allows the ECM to automatically learn the throttle valve position.
The throttle body must be removed from the vehicle, so it’s best to purchase a throttle body gasket as well. 1. Remove the breather hose and air intake hose.
The battery must read above 10-volts and engine temperature must be above 41.5 degrees for learning to complete successfully. 1) Turn the ignition key ON for at least 10 seconds and then OFF for at least 10 seconds. This procedure allows the ECM to automatically learn the throttle valve position.
What are the specifications for torque the throttle body?
Torque the throttle body bolts to following specifications: must be replaced with a new one. The battery must read above 10-volts and engine temperature must be above 41.5 degrees for learning to complete successfully. 1) Turn the ignition key ON for at least 10 seconds and then OFF for at least 10 seconds.
How to clean and relearn Hyundai throttle body?
1. Remove the breather hose and air intake hose. 2. With ignition key off disconnect the ETC connector from the throttle body. 3. Remove the 4 ETC throttle body mounting bolts and then pull out the ETC throttle body away from the intake manifold.
How to fix a 2005 Hyundai Santa Fe?
P0123 Code Fix. 2005 Hyundai Santa Fe 2.7L – YouTube Replace Throttle Position Sensor and Clean Throttle Body. P0123 Code Fix. 2005 Hyundai Santa Fe 2.7L
How to replace throttle position sensor and clean throttle body?
Replace Throttle Position Sensor and Clean Throttle Body. P0123 Code Fix. 2005 Hyundai Santa Fe 2.7L If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.
What was the engine code on my Santa Fe?
I had engine code P0123. I show how I fixed it by replacing the Throttle Position Sensor (TPS) and cleaning the Throttle Body. This was on my 2005 Hyundai Santa Fe 2.7L. Loading…
What happens when you clean out the throttle body?
In a lot of cases, if you recently cleaned out the throttle body and this occurred right after it is because there is still debris in the throttle bore causing the plate to not move smoothly. It is best to remove the throttle body and clean it fully on the front and rear of the bore.
How to relearn high idle after throttle cleaning?
The idle will relearn if you put the vehicle in drive and allow the idle to come down with all accessories off for about two to three minutes. Then turn on your a/c with blower in high position for three minutes.