Why are the turn signal lights on my Hyundai Elantra not working?
Turn signal lights: intermittently the turn signal lights do not work. 0n 4-17-97 while coming home turned the signa l ights on to turn and the vehicle just cut off. See all problems of the 1996 Hyundai Elantra .
Are there any problems with the Hyundai Elantra?
To avoid future citations I highly recommend that if you operate any 2013+ Hyundai product do not use the daytime running light feature because the parking lights will light up and you will be subject to a citation. I advised Hyundai via a recorded phone call about this problem.
Why is my left turn signal not working?
The contact stated that when completing a left turn, the left turn signal would continue to flash. The vehicle was taken to the dealer for diagnosis but the failure could not be duplicated. The manufacturer was notified of the failure and informed the contact that there was nothing they could do to assist with the issue.
What kind of rust is on Hyundai Elantra?
At inspection, mechanic noted severe and dangerous rust to subframe and subfloor in multiple areas of vehicle. Rear portion of subframe was almost completed rusted through. Additionally noted issues with rp brake light, plate light and fp turn signal. Ongoing issue with fusses and bulbs continually blowing/going out.
Where are the fuses located on a Hyundai Elantra?
Vehicle | Hyundai / Elantra / › 2011-2016. In model years 2001-2016 Hyundai Elantra the main fuses are located in the engine bay. Another fuse box is located under the dashboard on the driver’s side. This applies to Hyundai Elantra model years 2011, 2012, 2013, 2014, 2015, 2016.
Why is the left side of the turn signal not working?
This time, though, the left or right side of the signals doesn’t work. You may see the dash indicator lamps illuminating brightly, but the turn lights won’t flash. You may be dealing with bad bulbs or a fault between that side of the circuit and the turn signal switch itself.
Where does the turn signal light bulb go?
The turn signal light bulb mounts inside of the turn signal light socket. The turn signal light socket connects the bulb to the wiring that receives power when the turn signal is activated. Over time, the socket can become corroded, and may not make a good connection with the bulb.
Why does my turn signal light need to be replaced?
The turn signal light socket connects the bulb to the wiring that receives power when the turn signal is activated. Over time, the socket can become corroded, and may not make a good connection with the bulb. If you notice a flickering turn signal light that isn’t as bright as usual, your turn signal light socket may need to be replaced.
How to check a turn signal light socket?
Filter your results by entering your Year, Make, Model to ensure you find the parts that fit your vehicle. When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures. 5 out of 5 stars. Read reviews for Import Direct Ignition Multi-Function Socket
Why is my left turn signal light not flashing?
Operate the switch to turn the left turn signal light. Back probe the wire that supplies power to the switch; the test light should flash. If the test light doesn’t flash, there is a problem with the flasher unit or an open or short between the switch and the battery power source.
What should I do if my turn signal is not working?
A bolt or unpainted metal bracket will do. Then touch the socket contacts with your test light tip and have your assistant operate the turn lights. The test light should flash. If it does, check the ground connection at the socket.
Is there a turn signal for both left and right?
Although some models use a separate light for the left and right turn indicators, other models use a single light for both turns. If your instrument panel has only one indicator light for both left and right, check the flasher unit. Some vehicle models combine the brake light, taillight and turn signal into one light bulb.
Where are the brake lights on a Hyundai Elantra?
The most common location is the brake light switch . The good news is they are inexpensive and easy to replace. Your Elantra’s brake light switch is under the brake pedal. It ALWAYS should have power running to it, even if the key is off.
Why is the brake warning light on on my Hyundai Elantra?
Hyundai Elantra Brake Warning Light Causes The brake warning light indicates that your Elantra has detected that one of its major brake components has failed, typically detected through a loss of pressure. You’ll feel a loss of pressure that manifests itself in the form of a “mushy” brake pedal.
What to do if your brake lights are not working?
If none of the brake lights are working, we are going to follow the circuit from the fuse box back to the brake pedal. At some point the power is not getting from point A to point B. We just have to find where that is. Please note that tail lights can work even if the brake lights are burned out.
Is there a recall on the 2013 Hyundai Elantra?
Hyundai dealers will replace the brake pedal stopper pad with an allegedly improved part. If you own a 2013 Elantra and have questions about the recall, call 855-371-9460 and ask for information about Hyundai’s recall number 146. Hyundai has had past problems related to brake light switches, but for different reasons.
Why do the brake lights stay on when the pedal is released?
Hyundai believes the brake pedal stopper pad material can deteriorate over time allowing the stop light switch plunger to remain extended when the brake pedal is released. This will cause the brake lights to stay on continuously and the traction control warning light to stay lit.
Why is the right turn signal light not working?
Back probe the wire that supplies power to the right turn signal lights; the test light should not light. If the test light illuminates, replace the switch. Repeat the test, but this time operate the switch so the right turn signals light.
This time, though, the left or right side of the signals doesn’t work. You may see the dash indicator lamps illuminating brightly, but the turn lights won’t flash. You may be dealing with bad bulbs or a fault between that side of the circuit and the turn signal switch itself.
What makes a car have a turn signal problem?
Most common problem sources include bulbs, wires, connectors, fuses, flasher units, and switches. So the average car owner can troubleshoot these faults with the use of a test light and, sometimes, a digital multimeter (DMM).
How can I find out if my turn signal is bad?
Locate the fuse using your car owner’s manual or vehicle repair manual, or check the ‘Checking a Light Bulb Socket for Ground and Power’ section above, or the ‘Testing the Turn Signal Flasher’ further down. Check the bulbs condition. Make a visual inspection of the bulb sockets – look for corrosion and damage.
Why do emergency lights and turn signal lights not flash?
If the emergency lights and turn signal lights illuminate but don’t flash, check first for a burned-out bulb. This is the most common cause. If not, you may be dealing with a bad flasher unit or a bad turn signal switch. See the sections ‘Testing the Turn Signal Flasher’ and ‘Checking the Turn Signal Switch.’