What does the DTC code p0017 stand for?

Code P0017 means that your car’s powertrain control module detects a misalignment between the crankshaft and camshaft positions. What Does the P0017 Code Mean? Diagnostic trouble code (DTC) P0017 stands for “Camshaft Position B – Camshaft Position Correlation (Bank 1).”

What causes an out of time engine p0014 code?

This can happen due to worn tensioner, guide or even the timing chain or belt itself. The effects of an out-of-time engine are quite pronounced though and can trigger the P0014 code along with others. P0014 and related codes are frequently triggered due to negligence.

What causes the p0017 code on the ECM?

Technicians will use an oscilloscope to examine the crank and cam sensor pattern the ECM/PCM is reading while the engine is running. A damaged timing chain or belt can trigger code P0017. What are the Possible Causes of the P0017 Code?

What to do if your timing chain is misaligned?

If the signal appears normal, then check the timing chain/belt for proper alignment. If it’s misaligned, check for a damaged tensioner that may have allowed the chain/belt to slip a tooth or several teeth. Also check that the belt/chain isn’t stretched. Repair and recheck. Legen..wait4it..Dary!

What does it mean when code p0014 is set?

The camshaft (s) is (are) adjusted by the ECM through the use of an oil control valve (s) (OCV) also called variable valve timing control solenoid valves. When trouble code P0014 is set, it means that the exhaust camshaft in Bank 1 is more advanced than the ECM has told it to be. What Are The Symptoms Of Code P0014? What Is The Cause Of Code P0014?

What causes crank position on GMC Terrain p0017?

Even the slightest misalignment can cause P0017. The Crankshaft Sensor is going to use a tone or reluctor ring to determine the position of the Crank. This ring uses notches that are scanned by the Crank Sensor in order to get an accurate position. If this ring fails, the Terrain will not be able to get an exact crank position.

What causes a crankshaft to be in p0017 position?

To sum things up, the common causes for code P0017 are as follows: 1 A faulty cam or crank sensor 2 The cam or crank circuit is open or shorted 3 The timing belt/chain is out of time 4 The cam or crank tone ring is slipped/broken 5 A problem in the VVT system 6 The PCM is faulty

What is the p00xx code for the camshaft?

The ECM/PCM detects any out-of-time situation regarding the crankshaft and camshaft (greater than 9 degrees on a GM) and sets the P00xx codes listed above. Technicians will use an oscilloscope to examine the crank and cam sensor pattern the ECM/PCM is reading while the engine is running.

What does p0017 stand for in Chevy Colorado?

P0017 refers to which camshaft position sensor is out of time with the Crankshaft. In this case it’s sensor “B”, Sensor “A” throws P0016 P0017 should be considered an important trouble code to diagnose and repair. The crank and cam sensors work in tandem to produce the ideal air/fuel ratio for your engine.

How do I fix a trouble code p0017?

Now the answer to your biggest question, “How do I fix trouble code P0017?” If the engine is running fine, assume there is something wrong with the sensor and replace it. If the error continues to be given, or if the engine is running poorly, turn your attention the crankshaft and camshaft.

What are the symptoms of Chevy Traverse p0017?

Here are the major symptoms of P0017 in the Traverse: 1 Failure to start 2 Rattle coming from the motor 3 Service engine soon light 4 Engine poorly running

What was the p0017 code on my GMC Acadia?

I firmly believe that all they did was pull the code from the OBDII scanner and see the P0017 code and just decide that it was the crank sensor, even after I suggested it might be timing related and was aware of the extended warranty for the problem. Thanks to those of you that offered advice.

Navigation