When do the warning and indicator lights come on on a Hyundai Tucson?
Hyundai Tucson: Warning and Indicator lights. The SRS service reminder indicator (SRI) comes on for about 6 seconds after the ignition key is turned to the “ON” position or after the engine is started, after which it will go out. This light also comes on when the SRS is not working properly.
What does the malfunction indicator light illuminates?
The light turns on only for a reason and you should not ignore it. You should always investigate the cause. What does the Malfunction Indicator Light mean? The Malfunction Indicator Light can signal three different types of problems. Occasional flashes indicate temporary engine malfunctions.
When does TPMS malfunction indicator come on Hyundai Tucson?
TPMS malfunction indicator comes on for 3 seconds after the ignition key is turned to the “ON” position. If the warning light does not come on, or continuously remains on after comming on for about 3 seconds when you turned the ignition key to the “ON” position, the Tire Pressure Monitoring System is not working porperly.
What does the amber exclamation mark mean on a Hyundai Tucson?
The amber steering wheel / exclamation mark is the electronic power steering (EPS) fault light. If you have been making frequent left / right steering movements or had the steering placed at full lock while the engine is on, it may be a temporary fault where the system temporarily shuts off the power steering motor to prevent overheating.
Hyundai Tucson: Warning and Indicator lights. The SRS service reminder indicator (SRI) comes on for about 6 seconds after the ignition key is turned to the “ON” position or after the engine is started, after which it will go out. This light also comes on when the SRS is not working properly.
The light turns on only for a reason and you should not ignore it. You should always investigate the cause. What does the Malfunction Indicator Light mean? The Malfunction Indicator Light can signal three different types of problems. Occasional flashes indicate temporary engine malfunctions.
TPMS malfunction indicator comes on for 3 seconds after the ignition key is turned to the “ON” position. If the warning light does not come on, or continuously remains on after comming on for about 3 seconds when you turned the ignition key to the “ON” position, the Tire Pressure Monitoring System is not working porperly.
The amber steering wheel / exclamation mark is the electronic power steering (EPS) fault light. If you have been making frequent left / right steering movements or had the steering placed at full lock while the engine is on, it may be a temporary fault where the system temporarily shuts off the power steering motor to prevent overheating.
When does the malfunction indicator light go out?
Malfunction Indicator Light. This light illuminates when there is a malfunction of an exhaust gas related component and the system is not functioning properly. This light will also illuminate when the ignition key is turned to the “ON” position, and will go out in a few seconds after the engine is started.
What should I do if I have trouble with my Hyundai Tucson?
After adding fluid, if no other trouble is found, the car should be immediately and carefully driven to a Hyundai dealer for inspection. If further trouble is experienced, the vehicle should not be driven at all but taken to a dealer by a professional towing service.
What does the malfunction indicator light on a Hyundai mean?
On Hyundai cars, this is called the Malfunction Indicator Lamp (MIL), but you’ll probably know it as the check engine light. When the check engine warning light is illuminated it’s often accompanied by tell-tale signs that the engine is not working properly, such as a lack of power or stuttering as you press the accelerator.
Why does the warning light come on on my Hyundai Tucson?
This warning light comes on when a fault has been detected with the 4WD system. This warning light comes on due to a fault with the headlights. Faults may occur due to exterior lights; headlights, brake lights, fog lights because of burned-out bulbs (not LED light) or circuit malfunction.
Malfunction Indicator Light. This light illuminates when there is a malfunction of an exhaust gas related component and the system is not functioning properly. This light will also illuminate when the ignition key is turned to the “ON” position, and will go out in a few seconds after the engine is started.
When does an indicator light turn on on a car?
Indicator light turns on whenever the engine is turned on to check the bulb. If the light stays illuminated, the car’s diagnostic systems have detected a malfunction that needs to be investigated.
What does it mean when the collision alert light flashes?
If the collision alert flashes or turns on briefly, it means that the vehicle has intervened and avoided a collision. If the collision alert light stays on all the time, it means that the system has been disabled due to a problem. This light means that cruise control has been turned on.
What does the four wheel drive warning light mean?
The four wheel drive light means your car has activated four wheel drive. If the Service 4WD light is on, there may be an issue with the system. Is it safe to drive with the four wheel drive indicator lights on? Anyone who off-roads for a hobby knows that four wheel drive is a must have.