How to replace or repair the rear door handle, Door Latch?
Hardlymoving repairs and flips Toyota Camrys and has written extensively about these dependable cars. This do it yourself (DIY) article provides details on fixing or replacing the rear exterior door handle, door latch, or door lock actuator for the 4-door (1997-2001) Toyota Camry. The repair principles here will also work on other Toyota vehicles.
What should I do if my front door latch is jammed?
Start by removing the door handle. This can be done with a screwdriver (Flat or Phillips) to remove all screws of the door handle’s plates. Ensure that the door is unlocked before doing so. Once you’ve removed the handle, you can try to manually open the latch with either a pair of needle-nose pliers or a large flathead screwdriver.
Why does my door latch pull back when I spin the handle?
When you spin the handle to open a door this is also where the turn of the handle makes the latch pull back. On Kwikset locks, this will look like two small teeth that the cylinder pressed back.
How much does it cost to replace a Toyota door latch?
If you can’t open the door by pulling on either the inside or the outside door handle, you will have to replace the latch. Unfortunately, the latch assembly is a very expensive replacement product ($200), and Toyota does not sell replacement components for the assembly.
Hardlymoving repairs and flips Toyota Camrys and has written extensively about these dependable cars. This do it yourself (DIY) article provides details on fixing or replacing the rear exterior door handle, door latch, or door lock actuator for the 4-door (1997-2001) Toyota Camry. The repair principles here will also work on other Toyota vehicles.
Is it possible to repair a Hyundai Accent?
The Hyundai Accent is a reliable vehicle, And when it shows signs of its parts becoming faulty, owners know that they can easily repair it. This is because finding replacement parts for your Hyundai Accent is easy and convenient through CarParts.com.
How does a new door latch work on an old door?
If you bought a new replacement door latch, it is probably missing the door lock actuator assembly. The lock actuator from the old door latch must be transferred to the new latch (no photos). Three screws secure the lock actuator to the door latch. In addition, there is a small control lever that must be removed from the latch.
What to do if your door lock actuator is not working?
Sitting in the car with the doors shut, press on the locking switch of the affected door lock actuator. Then operate the inside door handle and open the door. If the door lock actuator is operating correctly, opening the interior door handle will override the door lock actuator.
How can I access the rear door handle?
Either removing or unbolting the door latch will allow access to the rear door handle mounting Bolt. Pulling off the “Child Lock Switch” rubber cover provides one path. You can access the front bolt through one of the door’s access holes. The interior of the old door handle has a lip that holds the handle to the door.
How do you replace a front door lock?
First, remove the door lock actuator assembly from the dock latch. There are three screws and a control lever that must be removed (no photo). The actuator assembly covers are glued together. Use either a small chisel or a wide flat-head screwdriver with a hammer to separate the covers. Remove the exposed motor from the assembly.
Is it easy to replace a car door?
Whatever your reason may be, removing and replacing a car door is not a very difficult process, and doesn’t require a huge, expensive mechanics tool set.
First, remove the door lock actuator assembly from the dock latch. There are three screws and a control lever that must be removed (no photo). The actuator assembly covers are glued together. Use either a small chisel or a wide flat-head screwdriver with a hammer to separate the covers. Remove the exposed motor from the assembly.
Either removing or unbolting the door latch will allow access to the rear door handle mounting Bolt. Pulling off the “Child Lock Switch” rubber cover provides one path. You can access the front bolt through one of the door’s access holes. The interior of the old door handle has a lip that holds the handle to the door.
If you can’t open the door by pulling on either the inside or the outside door handle, you will have to replace the latch. Unfortunately, the latch assembly is a very expensive replacement product ($200), and Toyota does not sell replacement components for the assembly.
When to get a new driver side door handle?
DEPO 335-50037-122 Replacement Driver Side Exterior Door Handle (This product is an aftermarket product. It is not created or sold by the OE car company) . . Only 16 left in stock – order soon. . In stock on February 19, 2021.
How do you replace a Camry door handle?
Once you get the cover off, you can replace the motor with a new one. The Camry-type replacement motor must have a brass collar attached to the end of the motor’s rod. A worm gear then slides over the collar. The worm gear, in turn, rotates the gears inside the actuator assembly. No specialized repair tools are required to replace these parts.
How to replace rear door handle, lock control rods?
Pull the door panel up and away from the door. Remove the white panel pin bracket from the door. From the rear portion of the door, peel back halfway the clear plastic vapor barrier. 7. Detach the Door Latch and Lock Control Rods
Is it possible to replace a Toyota door lock?
The actuator motor can be replaced, but is not available from dealers as a replacement part; they only have the complete door lock actuator assembly, for approximately $150. However, vendors on Amazon and eBay sell replacement motors for OEM (Original Equipment Manufacturer) providers of Toyota.
How does a Toyota rear door lock work?
The Toyota door lock actuator assembly encapsulates the motor and the gears it drivers in two black plastic covers. These covers are lightly glued together, and (as the last section of this article shows you) can be easily separated by striking the contact seams with a wide-tip screwdriver and hammer.