How do you put the back seats down in a 2012 Hyundai Sonata?
Pull on the seatback folding lever located in the trunk, then fold the seat toward the front of the vehicle. 6. To use the rear seat, lift and pull the seatback rearward. Push the seatback firmly until it clicks into place.
How do you open the backseat of a Hyundai Santa Fe?
To use the rear seat, lift and pull the seatback backward by pulling on the folding lever. Pull the seatback firmly until it clicks into place. Make sure the seatback is locked in place.
Can you remove the rear seats from a Hyundai i800?
That’s not a problem from which the i800 suffers though, as even with eight people inside there’s a decently sized boot. It’s not all good news though, because not only is the rear seat fixed, but none of the chairs can be removed altogether.
How to install a rear seat in a Hyundai Santa Fe?
Install in the reverse order of removal. 1. Remove the luggage covering met (A). 2. After loosening the mounting screws, then remove the luggage floor box (A). 3. Loosen the third row seat assembly rear mounting bolts (A). 4. Remove the third row seat track mounting cover (A). 5.
How to remove the back bench of Hyundai?
Reach between the seat cushion and back rest and pull the seat cushion up to a vertical position. Then pull the seat cushion out the drivers side rear door to remove it from its mounting bracket. Once the seat cushion is removed unbolt the folding back rest.
How do you remove the rear seat in a Kia?
If there are no bolts, you will lift the seat to remove it. If you can find no bolts, then try the following to remove the rear seat. Lift the front part of the seat to unlatch it. Move the seat cushion back towards the trunk, then lift. Install the seat in reverse order.
How do you replace the second row seat in a Kia Sorento?
1. Push the second row seat assembly [RH] (A) towards the front of the vehicle as far as possible. 2. Loosen the second center seat belt buckle mounting bolt (A). 3. Push the second row seat assembly towards the front of the vehicle as far as possible. 4. Loosen the second row seat assembly rear mounting bolts (A). 5.
Install in the reverse order of removal. 1. Remove the luggage covering met (A). 2. After loosening the mounting screws, then remove the luggage floor box (A). 3. Loosen the third row seat assembly rear mounting bolts (A). 4. Remove the third row seat track mounting cover (A). 5.
If there are no bolts, you will lift the seat to remove it. If you can find no bolts, then try the following to remove the rear seat. Lift the front part of the seat to unlatch it. Move the seat cushion back towards the trunk, then lift. Install the seat in reverse order.
How to lay down rear seats for more cargo space?
HYUNDAI SANTA FE – How to lay down rear seats for more cargo space. – YouTube HYUNDAI SANTA FE – How to lay down rear seats for more cargo space.
1. Push the second row seat assembly [RH] (A) towards the front of the vehicle as far as possible. 2. Loosen the second center seat belt buckle mounting bolt (A). 3. Push the second row seat assembly towards the front of the vehicle as far as possible. 4. Loosen the second row seat assembly rear mounting bolts (A). 5.