What does p0014 mean on a Hyundai Tucson?
This includes the Hyundai Tucson. VVT adjusts the camshafts position at different RPM’s and engine loads to maximize the operating efficiency of the motor. P0014 means that the camshaft position is too far advanced from where it should be in relation to normal operating specs. Below, you’ll find some typical issues that cause P0014.
What does the OBD code p0017 mean?
What the P0017 code means. P0017 is the OBD-II generic code indicating that the crankshaft and camshaft position sensor for bank 1 exhaust camshaft do not correlate signals with each other.
How to diagnose p0017 in your Tucson?
This is a great place to start diagnosing P0017 in your Tucson. It’s quick and easy to do this before moving on to the sensors themselves. Make sure to check the harness where it plugs into both sensors as well. After examining the wiring harness, it would be time to check the sensors themselves.
What does the p0014 do on a VVT?
VVT uses camshaft actuators to adjust the position of the cam. When the camshaft timing will not return to a less aggressive profile after heavy engine load, P0014 will be thrown. P0014 affects bank 1, which is on the side of the engine where cylinder one occurs in the firing order.
This includes the Hyundai Tucson. VVT adjusts the camshafts position at different RPM’s and engine loads to maximize the operating efficiency of the motor. P0014 means that the camshaft position is too far advanced from where it should be in relation to normal operating specs. Below, you’ll find some typical issues that cause P0014.
This is a great place to start diagnosing P0017 in your Tucson. It’s quick and easy to do this before moving on to the sensors themselves. Make sure to check the harness where it plugs into both sensors as well. After examining the wiring harness, it would be time to check the sensors themselves.
What does the PCM code p0017 stand for?
The CKP and CMP sensors work together to keep the PCM informed about engine timing. Should the timing be off, the PCM will set a code P0017. This code stands for Crankshaft Position – Camshaft Position Correlation (Bank 1 Sensor B). The B sensor is likely on the exhaust side.
What does p0017 stand for in Chevy Colorado?
P0017 refers to which camshaft position sensor is out of time with the Crankshaft. In this case it’s sensor “B”, Sensor “A” throws P0016 P0017 should be considered an important trouble code to diagnose and repair. The crank and cam sensors work in tandem to produce the ideal air/fuel ratio for your engine.
What can cause a p0014 DTC trouble code?
A P0014 DTC trouble code may be caused by one or more of the following: Incorrect camshaft timing Wiring problems (harness/wiring) in intake timing control valve control solenoid system Continuous oil flow to VCT piston chamber Failed timing valve control solenoid (stuck open)
What is the trouble code for Hyundai Tucson?
P0014 is a relatively common trouble code for vehicles that have Variable Valve Timing (VVT). This includes the Hyundai Tucson.
How does the p0014 camshaft position actuator work?
P0014 Description. The Camshaft Position (CMP) actuator is attached to each camshaft and is hydraulically operated in order to change the angle of the camshaft relative to Crankshaft Position (CKP). The CMP actuator solenoid is controlled by the control module.
A P0014 DTC trouble code may be caused by one or more of the following: Incorrect camshaft timing Wiring problems (harness/wiring) in intake timing control valve control solenoid system Continuous oil flow to VCT piston chamber Failed timing valve control solenoid (stuck open)
P0014 is a relatively common trouble code for vehicles that have Variable Valve Timing (VVT). This includes the Hyundai Tucson.
What does p0014 mean on Chevy Equinox?
P0014 means that the camshaft position is too far advanced from where it should be in relation to normal operating specs. Below, you’ll find some typical issues that cause P0014.