Why is my Hyundai Accent cranking but not starting?
There are a lot of issues that can cause your Accent to crank, but not start. The engine needs air, fuel, and a spark in order to run. It is highly likely that if the engine is cranking, but not starting that it has thrown an OBDII code. It is definitely worth it to use an OBDII scanner to check and see if the engine has thrown any trouble codes.
When was the Hyundai Excel replaced by the Hyundai Accent?
In Australia, the first generation models carried over the Hyundai Excel name used by the Accent’s predecessor. The Accent was replaced in 2000 by the Hyundai Verna in South Korea, although most international markets, including the US, retained the “Accent” name.
When did the Hyundai Accent come out in Indonesia?
In Indonesia, the Accent was assembled locally and marketed as the Bimantara Cakra from 1996 to 1998 (alongside the Bimantara Nenggala) and only available as 4-door sedan with a fuel injected 1.5 liter 12-valve engine and 5-speed manual transmission.
What kind of crash test does a Hyundai Accent do?
A pre-2003 model (a three-door hatchback) was crash tested by Australian Australasian New Car Assessment Program (ANCAP) under the rules as adopted by Euro NCAP. It scored 10.76 out of 16 points for frontal offset impact and 10.96 out of 16 in the side impact test.
There are a lot of issues that can cause your Accent to crank, but not start. The engine needs air, fuel, and a spark in order to run. It is highly likely that if the engine is cranking, but not starting that it has thrown an OBDII code. It is definitely worth it to use an OBDII scanner to check and see if the engine has thrown any trouble codes.
What does it mean when your accent won’t start?
When a starter goes bad, they will usually not give you much warning first. Also, if you are stuck somewhere and are trying to start your Accent, the old beat the starter with a hammer trick is not a wives tale. It really can get that one last start out of it. There are a lot of issues that can cause your Accent to crank, but not start.
How to check no start, no crank condition Hyundai?
Turn the ignition key to the ON position or push the Start/Stop Button two times. 2. Using the factory or enhanced scan tool, check for the DTCs listed above. Record the DTCs and description, then delete the DTCs. 3. Select the live data parameter for the “Shift Lever Switch.”
What causes a car to not start or crank?
An improperly adjusted or improperly operating inhibitor switch (range switch) may result in a vehicle that will not start or crank on an intermittent basis.
What does it mean when a Hyundai won’t start?
Will crank over but won’t fire up. Hyundai won’t start. Will crank over but won’t fire up. Car suddenly died and won’t start again. Heard a pop under Car suddenly died and won’t start again. Heard a pop under the hood … read more It wont start intermittently. Sometimes it starts and runs It wont start intermittently.
Is there a problem with my Hyundai Elantra?
Subaru and Nissan factory training. i have a 2001 hyundai elantra we just repplace the powersteering pump and the engine will turn over but won’t crank up and run. Is their and sense or what is the problem. … read more
When a starter goes bad, they will usually not give you much warning first. Also, if you are stuck somewhere and are trying to start your Accent, the old beat the starter with a hammer trick is not a wives tale. It really can get that one last start out of it. There are a lot of issues that can cause your Accent to crank, but not start.
What causes a car to crank but not start?
One of the biggest issues that causes a vehicle to crank but not start is ignition issues. When there is no spark, the engine will not start. You’ll probably have a misfire related code such as P0300, P0301, etc….. Ignition issues can be caused by many things, including bad spark plugs, bad coil packs, bad plug wires, computer issues, and more. 3.
Why does my Hyundai Accent not start properly?
The check indicator does not turn on either. The reason why the check light does not turn on is that the computer is burnt. In my case, I replaced it as well as the primer and it started. Hope it helps. No start problem. Oil Crankshaft Camshaft Fuel pump Fuel filter Battery I bought the car after it has been sitting for a year.
One of the biggest issues that causes a vehicle to crank but not start is ignition issues. When there is no spark, the engine will not start. You’ll probably have a misfire related code such as P0300, P0301, etc….. Ignition issues can be caused by many things, including bad spark plugs, bad coil packs, bad plug wires, computer issues, and more. 3.
When was the last time my Hyundai did not start?
On Tuesday, July 24, 2007 the car still would not start they said they were communicating with Hyundai on the problem and they have not called them back with the correct codes. I returned on Friday, July 27, 2007 they told me that the engine was safe and if I wanted I could take my car with the engine light still on.
How to know if your engine has no spark?
First Confirm Your Engine Has No Spark. 1 Disable the fuel system by removing the fuel pump fuse or relay. 2 Insert a spark plug tester into the plug boot and ground it on a piece of metal on the engine. 3 Finally, Have someone crank the engine and watch for spark.
First Confirm Your Engine Has No Spark. 1 Disable the fuel system by removing the fuel pump fuse or relay. 2 Insert a spark plug tester into the plug boot and ground it on a piece of metal on the engine. 3 Finally, Have someone crank the engine and watch for spark.
Why does my car have a no spark light?
In this case you most likely have a failed ignition coil. That would explain why you have injector pulse and no spark. If the light does not flash, you still have a problem with both injector pulse and spark, suspect a problem with the ECM (engine control module).
Why does my car not start when I crank the engine?
The crankshaft position (CKP) sensor monitors the position or rotational speed of the crankshaft. If the crankshaft position sensor has failed completely, and isn’t sending a signal to the (ECU) at all, then the computer won’t send any fuel to the injectors. This will leave you unable to start the car.
What causes a car to stall with no spark?
Consequently, An old or failing ignition pickup may cut out signal intermittently, which may cause the engine to stall. The engine may suddenly just shut off, almost as if the key had been turned off. Depending on the nature of the issue, sometimes the vehicle can be restarted and driven.
Why does my Hyundai Getz crank but not start?
Check the spark. Without spark to ignite the fuel mix in the combustion chamber, the engine will not start. It will turn over or “crank over” but will never actually run. Spark issues are not limited to the plugs. Check the spark plug wires, the distributor or module, and plug gap.
Turn the ignition key to the ON position or push the Start/Stop Button two times. 2. Using the factory or enhanced scan tool, check for the DTCs listed above. Record the DTCs and description, then delete the DTCs. 3. Select the live data parameter for the “Shift Lever Switch.”
On Tuesday, July 24, 2007 the car still would not start they said they were communicating with Hyundai on the problem and they have not called them back with the correct codes. I returned on Friday, July 27, 2007 they told me that the engine was safe and if I wanted I could take my car with the engine light still on.
What kind of engine does a Hyundai Accent have?
Engine code 15 Make Year of construction Engine capacity Hyundai Accent 1998 1,500 cc Mazda 323F 1997 1,500 cc Smart City Coupe 2003 698 cc 2004 698 cc 2005 698 cc 2009 Renault Clio 2006 1,481 cc
How to decipher the Hyundai vehicle identification number?
Deciphering the Hyundai Vehicle Identification Number DIGIT # VIN # U= A= A = B= C= C= M= D= = E= = F= = G= = H= = J= = K= = L= = M= = N= = P= = R= = S= = T= V= W= X= Y= 1= 2= 3= 4= 5= 6= 7= 8= 9= B= C= D= D= D= D= E= F= F= F= G= H= J= M= N= R= S= T= V= 0= 2= 1= 2= 3= 3= 4= 5=
If the engine doesn’t crank, or makes an unusual noise when cranking, you may have a starting system problem. The car’s security system may have made an error that disabled the fuel or ignition system, or the chip in the key may have failed.
What to do if engine cranks over won’t start?
Engine Cranks Over Won’t Start: Purchased a OBDS2 and Received a Purchased a OBDS2 and received a code camshaft position A low input sensor. Installed new one and the code read the same except for high input sensor. Still won’t start.
Can a bad crankshaft sensor cause the engine to stall?
If the crankshaft position sensor or its wiring have any issues, it can cause the crankshaft signal to be cut off while the engine is running, which can cause the engine to stall. This is usually a symptom of a wiring problem, however a bad crankshaft position sensor can also produce this symptom.
What’s the voltage of the Hyundai Accent battery?
The voltage of the battery on your Hyundai Accent can be measured precisely with a multimeter. Before the test, the multimeter is set to the voltage range of the battery and connected to its plus and minus poles. Successful testing of the car battery, i.e. checking the voltage, usually results in values of approx. 12 to 13 volts.
What kind of electrical system does Hyundai Accent have?
The IAC valve, coil, spark plugs and its wiring and both the crankshaft and camshaft sensors had previously been replaced. All the new pieces were original ones, so the mechanic did not understand what was happening. After that, I asked him to show me all the vehicle’s contacts, bought an electrical contact cleaner and proceded to clean one by one.
What should I do if my Hyundai Accent fuel pump is failing?
You should first connect a pressure gauge and check the fuel pressure, which should be around 40 lbs. They should be maintained when closing the switch. Does this mean that it might be the fuel pump that is failing, JOHANNES? It worries me, but at the same time, when the engine is already warm, the failure tends to get better.
Are there any problems with the Hyundai Accent?
Hyundai Accent owners have reported 8 problems related to car will not start (under the electrical system category). The most recently reported issues are listed below. Also please check out the statistics and reliability analysis of Hyundai Accent based on all problems reported for the Accent.
When did the Hyundai Accent get a battery replacement?
No power, no lights, can’t even open doors without a key. Battery replacement fall 2020 2006 Accent: Is the Odometer Digital Readout ON all the time?
Why does my Hyundai Accent vibrate at idle speed?
The mechanic I use, found that the engine ground was faulty. They replace the ground wires and all is well. My car vibrates way too much at idle speed. I’ve been having this problem for quite a long time now and, when scanning it, there is no error indicated.
Engine Cranks Over Won’t Start: Purchased a OBDS2 and Received a Purchased a OBDS2 and received a code camshaft position A low input sensor. Installed new one and the code read the same except for high input sensor. Still won’t start.
How to fix a Hyundai Elantra ( cranks but wont start )?
HOW TO FIX A HYUNDAI ELANTRA (CRANKS, BUT WONT START!) SOLVED!!! – YouTube HOW TO FIX A HYUNDAI ELANTRA (CRANKS, BUT WONT START!) SOLVED!!! If playback doesn’t begin shortly, try restarting your device.
What is the radio Pin code on a Hyundai?
The radio PIN code for your vehicle is a unique anti theft number which prevents the radio being removed from the vehicle by unauthorised persons. This code is supplied to the owner of the vehicle on a blue card that is of similar size to a credit card, and generally provided with the owner’s manual and service passport when a new vehicle is sold.
Why is my GPS not working on my Hyundai?
From time to time, your smartphone may experience a drop-out in the GPS signal and/or reception. This can result in the Hyundai Auto Link driving history being intermittently recorded and showing incorrectly on the driving history map. Please ensure your phone is not working in Low Power Mode as the phone may turn off GPS as part of this function.