How do you remove starter from Hyundai Sonata?
Disconnect the starter cable (A) from the B terminal on the solenoid, then disconnect the connector (B) from the S terminal. 8. Remove the 2 bolts (C) holding the starter, then remove the starter. 9. Installation is the reverse of removal. 1. Disconnect the M-terminal (A) on the magnet switch assembly (B). 2.
What are the repair procedures for a Hyundai Sonata?
Repair procedures Hyundai Sonata YF 2011-2014 Service Manual / Engine Electrical System / Starting System / Starter. Repair procedures 1. Remove the engine cover. 2. Disconnect the battery negative terminal (A). 3. Remove the air duct (B). 4. Remove the air cleaner assembly.
What should the amperage output be on a Hyundai Sonata starter?
Check the battery—it should have 12.5 volts or more. If it has less than 12.5 volts, the battery or charging system is suspect. It is possible for a battery to show 12.5 or better on voltage and a bad cell, which would kill the amperage output. Amperage output is needed to activate the starter.
What to do if there is no power in the starter?
If there was no power at the switch, then go to the ignition key, which is the next step in line. Remove the bottom cover on the steering column and check the yellow wire for power when the key is in start. If there is no power, replace the ignition switch electrical side.
How much does it cost to replace a Hyundai Sonata starter?
The average cost for a Hyundai Sonata starter replacement is between $437 and $458. Labor costs are estimated between $83 and $104 while parts are priced at $354. This range does not include taxes and fees, and does not factor in your specific model year or unique location.
Repair procedures Hyundai Sonata YF 2011-2014 Service Manual / Engine Electrical System / Starting System / Starter. Repair procedures 1. Remove the engine cover. 2. Disconnect the battery negative terminal (A). 3. Remove the air duct (B). 4. Remove the air cleaner assembly.
How much does it cost to replace a belt on a Hyundai Sonata?
This range is based on the number and age of Hyundai Sonata’s on the road. For a more accurate estimate based on your Hyundai and location, use our Fair Price Estimator.
How does a starter solenoid work on an electric car?
The starter is an electric motor that spins the engine when you turn the ignition key. This allows the engine to begin running. How does the starter work? The starter solenoid receives power from the battery at all times.
Why is my 2015 Hyundai Sonata not starting?
Starting issues with the 2015 Hyundai Sonata were most likely related to the battery or the battery cables. Experts advised customers to perform a voltage test to ensure that the battery is performing properly. 2020 Hyundai Sonata won’t start
Why does my Hyundai Sonata make a clicking noise?
If your Hyundai Sonata won’t start and make some clicking noises, this indicates a drained battery. Sometimes your battery might have enough charge to make the clicking noise, but this charge depletes immediately after the starter requests some electrical current. Hyundai Sonata won’t start, but the battery is good
What to do if your Hyundai Sonata won’t start?
If your Hyundai Sonata won’t start, the problem is related to the battery, the battery terminals, the key fob battery, the starter, the alternator, the fuel filter, the fuse, the spark plug, or the engine. Auto Repairs Are EXPENSIVE Hyundai Sonata is one of the top-ranked midsize vehicles that attract tons of customers every year.
If your Hyundai Sonata won’t start and make some clicking noises, this indicates a drained battery. Sometimes your battery might have enough charge to make the clicking noise, but this charge depletes immediately after the starter requests some electrical current. Hyundai Sonata won’t start, but the battery is good
What should the voltmeter be on a Hyundai Sonata?
Set the voltmeter to 20 volts dc. Check the battery—it should have 12.5 volts or more. If it has less than 12.5 volts, the battery or charging system is suspect. It is possible for a battery to show 12.5 or better on voltage and a bad cell, which would kill the amperage output.
What kind of engine does the Hyundai Sonata have?
NF Sonata was launched in August 2004 in Korea on the basis of a new platform created from the NF project. The first all-aluminum engine I4, called Theta, made its debut in the new Sonata. The choice of engine at startup was 2. 4-liter I4 with a power of 164 hp. (122 kW) at 5800 rpm and 3. 3-liter V6 with a power of 237 hp. (177 kW) V6.
When did the Hyundai Sonata third generation come out?
Sonata has replaced itself in the market of Stellar in the line of large family cars from Hyundai Motor. In 1992, the car was restyled. The sonata was designed by Hyundai Motor engineers in conjunction with Mitsubishi. The third generation Hyundai Sonata debuted in 1993, as a model of 1995.
Disconnect the starter cable (A) from the B terminal on the solenoid, then disconnect the connector (B) from the S terminal. 8. Remove the 2 bolts (C) holding the starter, then remove the starter. 9. Installation is the reverse of removal. 1. Disconnect the M-terminal (A) on the magnet switch assembly (B). 2.
Where can I find a Hyundai repair manual?
To narrow down your search please use the dropdown box above, or select from one of the available vehicles in the list below. Our Hyundai Automotive repair manuals are split into five broad categories; Hyundai Workshop Manuals, Hyundai Owners Manuals, Hyundai Wiring Diagrams, Hyundai Sales Brochures and general Miscellaneous Hyundai downloads.
What to do if your Hyundai starter motor won’t start?
Place the screwdriver place against both tabs at the same time. This shorts out the Hyundai’s starter solenoid and creates a connection between the starter motor and the ignition.
Where does the starter motor go on a Honda Accord?
The starter solenoid bolts onto the starter motor. Locate the two metal tabs on the back of the solenoid. A wire connects to each tab. The one on the left goes to the ignition and the one on the right goes down to the starter motor. Place the screwdriver place against both tabs at the same time.
Place the screwdriver place against both tabs at the same time. This shorts out the Hyundai’s starter solenoid and creates a connection between the starter motor and the ignition.
The starter solenoid bolts onto the starter motor. Locate the two metal tabs on the back of the solenoid. A wire connects to each tab. The one on the left goes to the ignition and the one on the right goes down to the starter motor. Place the screwdriver place against both tabs at the same time.
How do you replace a Mercedes Benz starter?
Place a wood block right under the engine, close to the side of the mount that you will be removing and raise the engine one or two inches. This will allow you to remove the engine mount. Remove the engine mount. Motor mounts look like this. Mercedes-Benz Engine / Motor Mount Remove the old starter now that you have room.
When do I need to replace my solenoid starter?
When this is the case, it may be necessary to replace the entire starter when the solenoid goes bad. Sometimes the starter itself is the problem. Electrical issues can be annoying and inconvenient. They can also be hazardous and can cause damage.
Do you need to replace the starter motor in your car?
And frankly, most people will never need to replace a starter motor for the life of their vehicle. Intrepid but underfunded Saturday Mechanics might actually dismantle a malfunctioning starter and repair it themselves.