When to replace the alternator on a Hyundai Santa Fe?
The alternator is essential to keeping the vehicle battery charged and the car powered. The procedure for removing and replacing an alternator on a 2002 Hyundai Santa Fe can vary depending on the engine type.
How do you replace an alternator on a car?
Remove the drive belt. Remove the alternator’s two mounting bolts and remove the alternator. Install the replacement alternator and attach the mounting bolts. Reinstall the alternator drive belt and then tighten the upper and lower adjusting mount bolts. Connect the alternator’s electrical connectors and connect the negative battery cable.
How do you adjust the tension on an alternator?
Connect the alternator’s electrical connectors and connect the negative battery cable. Adjust the tension for the alternator drive belt by prying on the alternator housing and tightening the upper tension and lock bolts followed by the lower bolt. Disconnect the battery cable as described above. Loosen and remove the alternator drive belt.
Can a bad alternator leave a Hyundai Santa Fe without power?
A bad alternator can leave your Hyundai Santa Fe without power and unable to move. Alternators don’t always go bad in the exact same way. We’ll cover the symptoms of when an alternator goes bad, and how to diagnose a bad one (which is really pretty easy). The alternator’s job in your Santa Fe is to provide electricity as it is running.
What should voltage be on Hyundai Santa Fe?
Set it to read voltage. Specifically, you’ll need to set it to 20V DC. With your Santa Fe turned off, you’ll connect the negative side of the meter to the negative battery post or wire. You’ll then touch the positive side of the voltmeter to the positive battery wire.
What should a mechanic do before replacing an alternator?
The mechanic should check the entire charging system before installing a new alternator, including checking battery cables for corrosion and the condition of the battery. Inspect entire charging system (battery, cables, alternator). Inspect the drive belts. Test alternator output. Remove and replace alternator if found to be faulty.
Where is the alternator located in a car?
The alternator is the component that charges the battery in your car. When you use electrical components in your car (stereo, lights, etc.), the battery loses power. The alternator recharges the battery, replenishing the lost battery power. The alternator is located in the engine compartment.
What are the symptoms of a Bad Santa Fe alternator?
It’s the labor that makes the job expensive. Here are the most common symptoms of a bad alternator in a Hyundai Santa Fe: The battery light is designed to tell you that there is not enough voltage to properly charge the battery, or that the battery itself is not holding the proper voltage.
The alternator is essential to keeping the vehicle battery charged and the car powered. The procedure for removing and replacing an alternator on a 2002 Hyundai Santa Fe can vary depending on the engine type.
It’s the labor that makes the job expensive. Here are the most common symptoms of a bad alternator in a Hyundai Santa Fe: The battery light is designed to tell you that there is not enough voltage to properly charge the battery, or that the battery itself is not holding the proper voltage.
Remove the drive belt. Remove the alternator’s two mounting bolts and remove the alternator. Install the replacement alternator and attach the mounting bolts. Reinstall the alternator drive belt and then tighten the upper and lower adjusting mount bolts. Connect the alternator’s electrical connectors and connect the negative battery cable.