Why is my check engine light flashing Hyundai Sonata?
If the check engine light in your Hyundai Sonata starts glaring, that means that the problem needs immediate attention and your Hyundai should be brought in quickly. This blinking light usually indicates a severe engine misfire allowing unburned fuel to be dumped into the exhaust system.
Why is the Check Engine light coming on on my Hyundai Sonata?
The check engine light on your Hyundai Sonata will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it’s tightened, the light will turn itself off.
What does the EBD warning light on a Hyundai Sonata mean?
If the ABS warning light or EBD warning light is on and stays on, the speedometer or odometer/tripmeter may not work. In this case, have your vehicle checked by an authorized HYUNDAI dealer as soon as possible. The driver’s seat belt warning light and chime will activate to the following table when the ignition switch is in “ON” position.
What should I do if my Hyundai Accent warning light is not working?
1. Drive safely to the side of the road and stop. 2. With the engine off, check the engine oil level. If the level is low, add oil as required. If the warning light remains on after adding oil or if oil is not available, call an authorized HYUNDAI dealer.
What causes a Hyundai Sonata engine to misfire?
Keeping in mind that any engine needs air, fuel, and spark for ignition, your Hyundai Sonata’s fuel system can often cause the engine to misfire. It can run too lean or rich. Alternatively, there may not be enough fuel for proper combustion, or the fuel isn’t atomizing properly.
What causes a flashing check engine light on a Hyundai Sonata?
While a majority of the time, the flashing check engine light is going to be caused by a misfire related to your Sonata’s ignition system or fuel system (as stated above), there are other issues that can cause it. Your timing chain could have jumped . If you have VVT, it may be having issues.
What’s the error code on my Hyundai Sonata?
P1326 error code on 2013 Hyundai Sonata. Vehicle is in limp mode. Motor was already replaced on the vehicle by the P1326 error code on 2013 Hyundai Sonata.
What should I do if my Hyundai Sonata oil pressure light is not on?
With the engine off, check the engine oil level. If the level is low, add oil as required. If the warning light remains on after adding oil or if oil is not available, call an authorized HYUNDAI dealer. If the engine is not stopped immediately after the engine oil pressure warning light is illuminated, severe damage could result.
1. Drive safely to the side of the road and stop. 2. With the engine off, check the engine oil level. If the level is low, add oil as required. If the warning light remains on after adding oil or if oil is not available, call an authorized HYUNDAI dealer.