Why are my Santa Fe headlights not working?

Why are my Santa Fe headlights not working?

This eyebrow effect is not showing when the high beams are on. In addition when the low beams are in use, the myvision on both sides of the car is blocked out. This seems to be a common complaint which Hyundai will not address claming there is no fix since the lights are performing as designed.

Why are my headlights not working in high beam?

If just one bulb fails to work in either high beam mode or low beam mode, it may be the bulb. Most headlight failures that are limited to just high or low beams are related to a relay or the high beam control switch.

What to expect when your headlights stop working?

So if you want to know more about what to expect when you take your car in to have your headlights fixed, you may want to read on. When one headlight stops working, and the other one works just fine, the problem is usually just a burned-out bulb.

Can a blown headlight affect the other side of the car?

No. Your headlights should be powered independently from one another and blowing out one should not have any affect on the headlight on the other side of your car. If both of your headlights are out, they may have both blown out, or there may be an electrical issue with the vehicle. A blown headlight fuse is also a likely culprit.

This eyebrow effect is not showing when the high beams are on. In addition when the low beams are in use, the myvision on both sides of the car is blocked out. This seems to be a common complaint which Hyundai will not address claming there is no fix since the lights are performing as designed.

Where are the low beams on a 2011 Hyundai Santa Fe limited?

I found out that there is actually a headlight relay under the driver’s side dash that, when it is bad, will cause there to be three highs at the headlights. You can find it between the side of the car and where the hood latch is located. I have the identical problem on my son’s 2011 Hyundai Santa Fe Limited. Low beams suddenly stopped working.

Is it possible to fix a bad low beam headlight?

Fortunately, fixing a bad low beam is a straight forward process in the majority of vehicles that can be done by most people without just a few hand tools. If replacing your headlight bulb does not work, there may be an electrical issue in your vehicle that should be addressed by a professional. Identify a blown out bulb.

Why are the headlights not working on my Hyundai?

After looking over the schemetic a few time and taking some readings at the headlights I figured that the dimmer switch was not passing a ground when in lowbeam position. When in highbeam I had 2 hots and a ground, when in low I had 3 hots not good. Hope that if anyone else has a simular problem this helps. Did you buy the car like that?

What kind of headlight bulb does Hyundai Santa Fe use?

Hyundai Santa Fe 2017, Performance HID/Xenon Headlight Bulb by Lumen®. 1 Bulb, White color bulb, 5000K, 35W. HID/Xenon bulbs are brighter and last much longer than halogen bulbs, but they too eventually require replacement. If you’re… Hyundai Santa Fe 2017, Performance Halogen Headlight Bulbs by Lumen®. 1 Pair, White color bulbs, 3700K, 55W.

What to do if your Hyundai Sonata headlamp is not working?

Turn off the engine. Allow it to cool down before checking the connections. Open the hood. Lightly tug on the electrical connector at the rear of Sonata’s headlamp assembly. If the connector comes out, securely plug it into the rear of the assembly. If the headlights are still malfunctioning, you may need to replace the bulb.

Turn off the engine. Allow it to cool down before checking the connections. Open the hood. Lightly tug on the electrical connector at the rear of Sonata’s headlamp assembly. If the connector comes out, securely plug it into the rear of the assembly. If the headlights are still malfunctioning, you may need to replace the bulb.

What should I do if my headlight is not working?

Unplug the light, pull the switch, and see if the fuse blows. If not, the problem is not in the wiring. Make sure you have purchased the correct wattage of bulb. Ensure that you do not have a faulty or damaged bulb. Check and see if your high beam bulb is the issue. If so, replace it. Check all wired connections and look for any exposed wiring.

If just one bulb fails to work in either high beam mode or low beam mode, it may be the bulb. Most headlight failures that are limited to just high or low beams are related to a relay or the high beam control switch.

Why is my Hyundai Santa Fe dark at night?

Hyundai says it is designed that way to prevent glare with the hid lights the vehicle has. It is hard to see much in the left lane when driving. The attached photo shows the dark spot on the left side of center. It has been that way since I first drove the car at night.

How to turn on welcome light on Hyundai Santa Fe?

If this item is checked, the welcome light function of the puddle lamp will be activated. If this item is checked, the lane change signals will blink 3 times when the turn signal lever is moved slightly. Convert the temperature unit from °C to °F or from °F to °C.

What can cause a low beam headlight to be dim?

If it is, use a voltmeter to see how much power, if any, is reaching the headlights. If there is no power reaching them, there is a break in the wiring somewhere between the fuse panel and the headlights themselves. Thanks! What can cause the light to be dim except when on the high beam setting?

Hyundai says it is designed that way to prevent glare with the hid lights the vehicle has. It is hard to see much in the left lane when driving. The attached photo shows the dark spot on the left side of center. It has been that way since I first drove the car at night.

If it is, use a voltmeter to see how much power, if any, is reaching the headlights. If there is no power reaching them, there is a break in the wiring somewhere between the fuse panel and the headlights themselves. Thanks! What can cause the light to be dim except when on the high beam setting?

Why did my Hyundai Santa Fe lose power?

After driving approx. 20 minutes, headlights went out and dashboard lights. We had no visibility, attempted to stop vehicle, left pavement and struck a tree. During our week rental of this vehicle we did have issues with SUV losing power when climbing a hill, but not a steep one at all. SUV would drop at least 10 mph when doing so.

Is there a problem with my low beams?

I have a Gen 4. I have checked all of my fuses just to make sure they were all good. My low beams do not work at all. However, my high beams work fine. If i have the low beams turned on, there is nothing. When i turn on the high beams, they work fine. Heres the wierd part though.

Why does my Santa Fe lose light at night?

Dark spot in low beam headlight field causes loss of view for driver as the dark spot passes from object to object. People or animals, even signs lose illumination as the dark spot covers them. Reflective barrels in construction areas lose their reflectivity at night as this spot covers them. This occurs on the low beam function.

What causes loss of view in Hyundai Santa Fe?

Also please check out the statistics and reliability analysis of Hyundai Santa Fe based on all problems reported for the Santa Fe. Dark spot in low beam headlight field causes loss of view for driver as the dark spot passes from object to object.

Why are the headlights dimming on my Hyundai?

Excessive resistance in high amperage circuits can cause an issue where Hyundai headlights dim or Hyundai blower motor slows down, or Hyundai radio turns off and on. The high resistance can also cause the ABS light to come on and set multiple trouble codes like; C2402, C1102, C1616 & C1611.

Also please check out the statistics and reliability analysis of Hyundai Santa Fe based on all problems reported for the Santa Fe. Dark spot in low beam headlight field causes loss of view for driver as the dark spot passes from object to object.

Why does my Hyundai Santa Fe have an eyebrow effect?

This seems to be a common complaint which Hyundai will not address claming there is no fix since the lights are performing as designed. At this point in time they do not offer a remady. This eyebrow effect appears when the car is stationary or in motion but only on the low beams.

Dark spot in low beam headlight field causes loss of view for driver as the dark spot passes from object to object. People or animals, even signs lose illumination as the dark spot covers them. Reflective barrels in construction areas lose their reflectivity at night as this spot covers them. This occurs on the low beam function.

What to do if your headlight fuse is not working?

First, locate the headlight fuse and make sure it is intact. If it is, use a voltmeter to see how much power, if any, is reaching the headlights. If there is no power reaching them, there is a break in the wiring somewhere between the fuse panel and the headlights themselves. Thanks!

Do you need to replace both high and low beams?

Some vehicles use a single bulb for both high and low beams while others do not. If the high beam on the same side is also out, it may be one bulb. You do not need to purchase specific bulbs for each side, but identifying which is the blown out bulb will help you to replace it without having to start the vehicle again.

What to do when your low beam light goes out?

Disconnect the battery. Be sure you remember which side of the car has a blown out low beam bulb before disconnecting the battery. To disconnect it, use a hand or socket wrench of the appropriate size to loosen the nut holding the ground cable onto the negative terminal of the battery.

I found out that there is actually a headlight relay under the driver’s side dash that, when it is bad, will cause there to be three highs at the headlights. You can find it between the side of the car and where the hood latch is located. I have the identical problem on my son’s 2011 Hyundai Santa Fe Limited. Low beams suddenly stopped working.

What are the lights on a Hyundai Santa Fe?

MULTIFUNTION SWITCH, STEERING ANGLE SENSOR, ESC SWITCH, ATM KEY LOCK CONTROL MODULE SEAT WARMER MODULE KEY SOLENOID, SPORTS MODE SWITCH, SEMIACTIVE SOLENOID (GASOLINE) INSTRUMENT CLUSTER, LUGGAGE LAMP, MAP LAMP, REAR PERSONAL LAMP

After looking over the schemetic a few time and taking some readings at the headlights I figured that the dimmer switch was not passing a ground when in lowbeam position. When in highbeam I had 2 hots and a ground, when in low I had 3 hots not good. Hope that if anyone else has a simular problem this helps. Did you buy the car like that?

What are the headlights for a Hyundai Santa Fe?

Use the form above to tell us what you drive. Use the form above to tell us what you drive. AutoZone’s headlights for Hyundai Santa Fe have both a high beam and a low beam to increase your vision during nighttime driving and inferior weather. They also allow you to drive safely in unfamiliar, difficult terrain, such as mountain passes.

Why is the Check Engine light on on Hyundai Santa Fe?

“The fuel sensors have failed, so the check engine light is on and the fuel gauge usually shows empty. The cost of repair was obscene – over $600 – so I refused the repair and track my need for gas with the tripometer. I have complained to the service manager, Hyundai USA, and the National Highway Traffic Safety Administration, all to no avail.

Fortunately, fixing a bad low beam is a straight forward process in the majority of vehicles that can be done by most people without just a few hand tools. If replacing your headlight bulb does not work, there may be an electrical issue in your vehicle that should be addressed by a professional. Identify a blown out bulb.

Why are my Hyundai Accent low beams not working?

My 2005 Hyundai Accent low beams are not working. The high beams only work if I pull the turn signal light multi-switch back but the high beams do not work if I put them in full-time high beam. I checked the voltage at the headlight bulb when on low beam and all 3 connections read high, just like the original poster.

My 2005 Hyundai Accent low beams are not working. The high beams only work if I pull the turn signal light multi-switch back but the high beams do not work if I put them in full-time high beam. I checked the voltage at the headlight bulb when on low beam and all 3 connections read high, just like the original poster.

Where to get replacement headlight for Hyundai Santa Fe?

When you experience a broken Santa Fe headlight, find a replacement at AutoZone that matches your SUV in high standards and exceptional value. AutoZone’s headlights for Hyundai Santa Fe have both a high beam and a low beam to increase your vision during nighttime driving and inferior weather.

This seems to be a common complaint which Hyundai will not address claming there is no fix since the lights are performing as designed. At this point in time they do not offer a remady. This eyebrow effect appears when the car is stationary or in motion but only on the low beams.

What kind of headlights do you need in a Hyundai Santa Fe?

Factory Fog Lights by Replace®. You need all your lights to be functional for safe driving, to see the road and be seen by other drivers. When driving in fog or inclement weather, fog lights are especially useful. Don’t drive with a… Universal LED Daytime Running Lights by Lumen®, 1 Pair.

What kind of light bulbs do I need for my Santa Fe?

Headlight Replacement Bulbs by Sylvania®. Sylvania HID bulbs are replacement xenon bulbs built to fine, exacting tolerances to fit like original equipment and install just as easily for vehicles already equipped with xenon igniters and… HID Headlight Replacement Bulbs by Oracle Lighting®.

Is the Hyundai Santa Fe a good car?

Enhancing your Hyundai with the most up-to-date and most desirable in upgrades may very well be probably among the most fun things when it comes to having a remarkable vehicle such as the Hyundai Santa Fe.

How to replace the headlight on a Hyundai Santa Fe?

We took this video to show you how to remove and replace the headlights on a Hyundai Santa Fe Generation from 2006 to 2012. We demonstrated on a 2007 model but it will be the same for the whole generation. All you are going to need is a 10mm wrench to remove the 2 bolts on the top and 1 nut behind the headlight.

How to replace the headlamp assembly on a Hyundai?

If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. Hello YouTube! I am a maker, builder, fixer, upcycler, amateur road-racer and ASE certified Master Automotive Technician.