What does check engine light mean on Hyundai Elantra?

A check engine light can indicate a broad spectrum of problems with your 2017 Hyundai Elantra. In some cases you need to pull over immediately to prevent damage while in others you merely need to tighten you gas cap next time you stop in order to reset the service engine soon light.

Are there any problems with the 2017 Hyundai Elantra?

Please also check out the statistics and reliability analysis of the 2017 Hyundai Elantra based on all problems reported for the 2017 Elantra. The contact owns a 2017 Hyundai Elantra. The contact stated while driving 46 mph, the vehicle loss motive power and stalled with the oil and check engine warning lights illuminated.

How to fix a burnt out Hyundai Elantra headlight?

2017 Hyundai Elantra Limited 2.0L 4 Cyl. Change center stop light Don’t be the guy with your third brake light burnt out 2017 Hyundai Elantra Limited 2.0L 4 Cyl. Try this cheap fix for leaks Animals love the sweet smell of antifreeze, too bad it’s toxic! Fix your minor leaks 2017 Hyundai Elantra Limited 2.0L 4 Cyl. Change a burnt out headlight

Why does my Hyundai Elantra engine keep stalling?

A few months after getting the car the engine kept stalling the engine light would only turn on after stalling each time I have brought it to multiple Hyundai dealerships they keep saying it’s just a spark plug issue. It’s frustrating since once off the lot a week later it’s randomly stalling again.this never fixed the issue.

What causes the Check Engine light to come on in a Hyundai?

In a Hyundai, the check engine light comes on as soon as the onboard diagnostic system ( OBD ) detects that there’s an issue with the way the engine operates or Evaporative Emission Control System ( EVAP) which is used to prevent gasoline vapors from escaping into the atmosphere. A fault code stored in…

Why is the Check Engine light on in a Hyundai?

The Hyundai Tucson malfunction indicator light (MIL), often referred to a the check engine light comes on and stays on when there’s a malfunction with the emission control system. Usual causes of the check engine warning light are faulty mass airflow sensor, faulty oxygen sensor or faulty exhaust gas recirculation valve (EGR).

What do the warning lights on a Hyundai Elantra mean?

The 2018 Hyundai Elantra also includes several warning lights meant to alert you to a serious problem with your vehicle that needs immediate repairs. These lights include: Braking: The letters ABS inside of a circle means your anti-lock braking system has malfunctioned.

When does Hyundai Elantra engine hesitate during acceleration?

Hyundai Elantra Engine hesitates during acceleration Inspection at your home or office. Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM. Our certified mobile mechanics can come to you now. Hyundai Elantra Engine hesitates during acceleration Inspection costs $89 on average.

How can I get my Check Engine light to go off?

One of the possible ways of getting your check engine light to go off is pulling off the engine control unit’s fuse and then putting it back again. Although this won’t solve the problem in newer cars, it may solve the problem in a little bit older cars, and it is easy to try. Check your repair manual to find the fuse to the engine control unit.

What causes a Hyundai Elantra to lose motive power?

The contact stated while driving 46 mph, the vehicle loss motive power and stalled with the oil and check engine warning lights illuminated. The contact stated that the failure occurred while driving uphill. Additionally, the failure was experienced while driving at various speeds, and was experienced on several occasions.

Where can I get a Hyundai Elantra engine replaced?

The vehicle was hesitant to respond to the accelerator pedal being depressed. The vehicle was taken to the local dealer gene messer Hyundai (4025 w. Loop 289, lubbock, TX 79407, (806) 785-7853) where it was diagnosed with needing the engine to be replaced. The vehicle was not repaired. The manufacturer was informed of the failure.

A check engine light can indicate a broad spectrum of problems with your 2010 Hyundai Elantra. In some cases you need to pull over immediately to prevent damage while in others you merely need to tighten you gas cap next time you stop in order to reset the service engine soon light.

Can a Hyundai Elantra engine be replaced on YouTube?

Hyundai Elantra engine replacement. – YouTube Hyundai Elantra engine replacement. If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

What was the problem with my 2013 Hyundai Elantra?

2013 Hyundai Elantra 1.8L short block replacement. Engine developed bottom end knock, found metal debris and bearing material in oil pan. Cam lobes, caps and cam carrier were found to be in good condition.

How to check for OBD 2 problems in Hyundai Elantra?

Use a scan tool to check for OBD II trouble codes. Any faults founds need to be repaired first. • Start the engine. • Warm up the engine (15 minutes at idle). • Turn OFF the A/C. STEP 2: (Steady State Driving – This is the main section of the drive cycle)

Are there any problems with the Hyundai Elantra?

Hyundai Elantra owners have reported 76 problems related to check engine light on (under the engine and engine cooling category). The most recently reported issues are listed below. Also please check out the statistics and reliability analysis of Hyundai Elantra based on all problems reported for the Elantra.

How often should you complete the Hyundai Elantra drive cycle?

You should complete this drive cycle at least two consecutive times, allowing for a 5 minute break in-between with the ignition turned off. Also ensure your Hyundai Elantra’s fuel tank is 1/4 to 3/4 full. An empty gas tank or full gas tank will not allow the EVAP monitor to run.

How many miles per gallon does a Hyundai Elantra get?

The Hyundai Elantra Hybrid can travel 54 miles per gallon with 139 horsepower and a 195 pound feet of torque sent to the front wheels through a six-speed dual-clutch transmission. This engine consists of 1.6 liter, 34 kilowatt electric motor, and a 1.3-kilowatt-hour lithium-ion battery.

What kind of engine does the Hyundai Elantra have?

The North American Market for the J2-series Elantra were only equipped with the 1.8 Beta G4GM and 2.0 Beta G4GF engines. Launched in 1995, the second generation (codename RD or J2) was offered as a sedan and station wagon. It was sold in the South Korean market as the “Hyundai Avante” in sedan form and “Avante Touring” in the wagon body style.

What to do when your check engine light comes on?

No matter the situation, when the check engine light comes on in your Hyundai, we always suggest stopping by our service center so one of our knowledgeable technicians can properly diagnose and repair your vehicle. Our service technicians have the most up-to-date diagnostic equipment that can quickly read Hyundai OBD-II Trouble Codes.

Why does my Infiniti check engine light keep blinking?

Gas cap issues can reduce fuel pressure and allow fuel vapors to escape, reducing fuel economy and increasing harmful emissions. Failing Catalytic Converter: Your catalytic converter can eventually clog with material, especially with higher mileage vehicles.

When does the malfunction indicator light go out?

If this light illuminates while driving, it indicates that a potential malfunction has been detected somewhere in the emission control system. This light will also illuminate when the ignition switch is turned to the ON position, and will go out in a few seconds after the engine is started.

Why does my Hyundai Elantra have a p0440 code?

Evap System Hose – The hose that carries the fuel vapor from the fuel tank to the intake manifold may leak. This will cause the P0440 code. Look for either a tear or hole in it. This is one of the most common issues that causes the code.

What happens if you have bad spark plugs in your Elantra?

The less cylinders that your engine has, the more that one cylinder not firing properly will have. If you have one or more bad spark plugs, it’ll cause the acceleration of the Elantra to be weaker. The less efficient the combustion of your engine, the more fuel is going to be wasted. This leads to a decrease in fuel economy.

Why is the timing cap on my Hyundai Elantra not working?

Taking it into the service center, there are no codes in the computer. The timing cap has been replaced once, because they were able to duplicate the issue at the shop, but the last two instances they were unable to duplicate so they refused to fix it.

What should I do if my check engine light is on?

This will help your mechanic evaluate the issue. Steady Check Engine Light: If your check engine light is on every time you operate your Elantra, you need to have it checked as soon as possible, especially if you notice performance problems or unusual noises.

What happens if your Elantra loses power while driving?

Engine will still run, just won’t perform as it should. Your local Hyundai dealer should be able to scan the ECM and pick up on a trouble code for that. My 2012 Elantra just did same thing while I was on interstate and I was run off road because I could not accelerate above 20 mph.

What does the malfunction indicator light on a Hyundai mean?

On Hyundai cars, this is called the Malfunction Indicator Lamp (MIL), but you’ll probably know it as the check engine light. When the check engine warning light is illuminated it’s often accompanied by tell-tale signs that the engine is not working properly, such as a lack of power or stuttering as you press the accelerator.

What does the ESC light mean on a Hyundai?

The ESC light will light up with the word ‘OFF’ if the system has been deactivated, in which case you may have inadvertently turned it off. To check, try stopping and restarting the engine. If the light remains on after restarting get it checked at a garage as the ESC system is an important safety feature.

Why is the Check Engine light on on my Hyundai Elantra?

Replacing the battery or having simply disconnected the battery on your Hyundai Elantra caused the engine control unit (ECU) to reset and clear all the emission monitors; including the trouble code which was causing the check engine light to turn on.

What’s the drive cycle for a Hyundai Elantra?

The entire process of self-testing various emission control systems is called a Drive Cycle. It is recommend to simply drive a vehicle 200-300 miles and over the course of a few days in both city and highway traffic conditions in order to make the emission monitors “ready” or “complete”.

Navigation