What should I do about my Hyundai Santa Fe intake manifold?

Repair procedures Hyundai Santa Fe DM 2013-2018 Service Manual / Engine Mechanical System / Intake And Exhaust System / Intake Manifold. Repair procedures 1. Disconnect the battery negative terminal. 2. Remove the air cleaner assembly. 3. Disconnect the intake OCV (Oil control valve) connector (A).

Is the oil pressure switch on my Hyundai Santa Fe broken?

UPDATE! 3.5L V6 2011 Hyundai Santa Fe Oil Pressure Switch IT BROKE AGAIN! – YouTube If playback doesn’t begin shortly, try restarting your device.

What to do if you have oil build up in intake manifold?

What you have to do to get rid of this problem is to pour an engine flush formula into the oil and run the engine for a few times. When the buildup is cleared, change the engine oil and don’t forget to replace the air filter. If it does not solve the issue, take the help of a professional mechanic. A blocked oil passage is another reason.

What are the components of a Hyundai Santa Fe?

Variable Intake Solenoid (VIS) Valve 23. Fuel Pressure Regulator Valve 24. Canister Close Valve (CCV) 25. Ignition Coil 26. Main Relay 27. Fuel Pump Relay 28. Data Link Connector (DLC) [16-Pin] 29. Multi-Purpose Check Connector [20-Pin] 1. Engine Control Module (ECM) 2. Manifold Absolute Pressure Sensor (MAPS) 3.

UPDATE! 3.5L V6 2011 Hyundai Santa Fe Oil Pressure Switch IT BROKE AGAIN! – YouTube If playback doesn’t begin shortly, try restarting your device.

What happens when there is oil in the intake manifold?

Here comes the intake or inlet manifold. It is a series of tubes that evenly distribute the air into the cylinders. It is bad news when there is oil in intake manifold. Why does this happen and what problem it can lead to? The inlet manifold passes the air to the cylinders through some valves.

What do you need to replace a spark plug on a Santa Fe?

Tools and materials needed: 10 & 12mm socket Ratchet wrench with long and short extensions spark plug socket pliers Philips screwdriver flat screwdriver adjustable wrench Metal crush gasket New surge tank gasket (part number: 29215)

Where are the tie down bolts on a Santa Fe?

Remove the three rear plenum tie down bolts. The left one you can see from the left side, the right one is right below the throttle cables about an inch from the right edge of the plenum, and the center one is under the main throttle cable bracket. DO NOT REINSTALL THE CENTER BOLT WHEN REVERSING THE PROCESS.

How much does it cost to replace an intake manifold?

Hyundai Santa Fe Intake Manifold Runner Control Replacement costs $134 on average. What is the Intake Manifold Runner Control all about? Your engine needs air in order to combust fuel, and varying amounts depending on the speed and driving condition.

What happens when you have a bad intake manifold?

If you have a bad intake manifold, the air-fuel mixture will get different than what it is supposed to be, and therefore the check engine light will show up on your dashboard. When the check engine light shows up – there is also a trouble code stored in the engine control unit that you need to read to continue the troubleshooting.

How to remove the intake manifold on a Kia Sorento?

1. Disconnect the battery negative terminal. 2. Remove the air cleaner assembly. 3. Disconnect the intake OCV (Oil control valve) connector (A). 4.

What kind of gasket does Hyundai Santa Fe have?

Hyundai Santa Fe 2.4L 2012, Engine Intake Manifold Gasket by Auto 7®. Heat and dirt are your engine’s greatest enemies. Let your engine breathe clean, fresh air and protect it from the destructive effects of dirt and dust. Auto 7 has… Hyundai Santa Fe 3.5L 2012, Intake Manifold Gasket Set by Mahle®.

1. Disconnect the battery negative terminal. 2. Remove the air cleaner assembly. 3. Disconnect the intake OCV (Oil control valve) connector (A). 4.

Navigation