Menu

Navigation

How do you program a Peugeot 307 key?

Posted on by Arif Clayton

How do you program a Peugeot 307 key?

Registered

  1. Turn the Ignition switch to ON position using the first key.
  2. Press the LOCK button for 10 seconds.It does meant LOCK button on plip key?
  3. Remove key and wait for 10 seconds.
  4. Check Plip key operation.
  5. Repeat for second Plip key if required.
  6. Turn ignition OFF.I guess ignition was OFF in step 3.

How do you program a Peugeot 206 key?

206 PLIP PROGRAMMING SYNCHRONISATION—BSI

  1. Insert Ignition Key.
  2. Press the small Black button.
  3. Switch the Ignition ON.
  4. Keep the lock button pressed for 10 seconds.
  5. Release lock button, switch ignition OFF and remove key.
  6. Close all doors and press the lock button 2 times.

How do you reset the BSi on a Peugeot 307?

Peugeot BSi reboot procedure

  1. Disconnect the diagnostic tool.
  2. Put the driver’s window down, lift the bonnet and ensure all.
  3. Ensure all doors are closed and remove key from the.
  4. Wait for 3 minutes, disconnect the vehicle battery and wait.
  5. Reconnect the vehicle battery, wait a further 10 seconds (do.

How do I reset my Peugeot 307 key?

2 Answers

  1. Insert key into ignition and turn to RUN, not start.
  2. Wait 10 seconds.
  3. Press the lock button for 10 seconds.
  4. Turn the key to OFF.
  5. Remove the key and wait for 10 seconds.
  6. Press the lock button, the dash lights should come on.

What does Plip battery spent mean on Peugeot 307?

If the message is “spent plip battery” or similar then this refers to the battery in the remote key for unlocking/locking the car. The key requires a new battery installing, it shouldn’t need to be programmed to the car again after the battery replacement.

How much does a new Peugeot car key cost?

Prices for Peugeot keys range from £185.00 to £210.00 and a non remote/fob key from £55.00. If you only have one Peugeot car key for your car then you are running the risk of being locked out of your car with no way to get to access to the car or use it.

What is a BSI fault?

BSI = Built-in Systems Interface Some later BSI units are liable to corrupt their own software program if not “woken up” in a specific way after programming keys or battery disconnection.