Is it okay to drive a Hyundai with p0171 code?
Vacuum leaks – PCV hose, vacuum hoses, intake manifold gasket. It is okay to drive your Hyundai with P0171 for a short period of time, but driving with this code for an extended period of time can overheat the engine and cause internal engine damage.
Where do I find the fault code on my Hyundai?
Connect your OBD-II scanner into the OBD-2 port under the dashboard on the driver’s side. Note: Even a $20 generic OBD-2 scanner can retrieve check engine / ECU Hyundai fault codes. Those are P-codes in the Hyundai list below.
When to use lean condition code p0171?
Combustion engines run most efficiently when they maintain an air-fuel mixture ratio of 14.7 parts air to 1 part fuel. When there are more than 14.7 parts air to 1 part fuel in the air-fuel mixture, a lean condition exists and code P0171 is triggered.
What is the fault code for the Hyundai Elantra?
Hyundai Sonata, Excel 90 on , Scoupe 91 & 92 , Elantra. Hyundai Scoupe 93 through 95 and Accent vehicles. 4155 ECM failure A/C relay, IAC, PC.” You will need a Hyundai multi-system OBD-2 scanner to read Hyundai specific fault codes.
Connect your OBD-II scanner into the OBD-2 port under the dashboard on the driver’s side. Note: Even a $20 generic OBD-2 scanner can retrieve check engine / ECU Hyundai fault codes. Those are P-codes in the Hyundai list below.
Vacuum leaks – PCV hose, vacuum hoses, intake manifold gasket. It is okay to drive your Hyundai with P0171 for a short period of time, but driving with this code for an extended period of time can overheat the engine and cause internal engine damage.
What is the problem code for the Hyundai ix35?
Hyundai Ix35 Engine lights on- Problem Code P0638 Unable to accelerate when engine starts. However if I start engine (insert and turn key with no hold/pause, to start engine it will work perfectly, car can accelerate. Can someone help me with this p…
What to do if check engine light code p0171 is triggered?
If check engine light code P0171 is triggered again, check the rest of the vacuum lines for leaks and continue to the rest of the diagnostic process. Remove the mass air flow sensor and clean the sensor using mass air flow cleaner or contact cleaner. Reinstall the mass air flow sensor and clear the check engine light using FIXD.