Why is my furnace kicking on but not blowing air?

Why is my furnace kicking on but not blowing air?

When you turn the furnace on but no heat comes out, there may be an obstruction. Dirty air filters restrict airflow, which can make it feel like not much heated air is coming out of your vents. Check the furnace filter and replace it if its surface is covered with contaminants.

Why is my furnace just humming?

But if you hear a loud humming or buzzing sound coming from your furnace, it usually means your furnace has an electrical problem. The most common electrical issues that cause a humming or buzzing sound include: A failing blower motor capacitor. An aging or unlubricated blower motor.

Why is air not coming out of my vents?

The most common cause of low air flow through the vents in your home is blocked or dirty AC filters. Be sure to keep the area around your AC filters clear of furniture and anything else that might block the flow of air, and be sure to clean or change your AC filters once a month.

How do I stop my furnace from humming?

Basic Troubleshooting Like with many devices that are in motion regularly, the humming could be the result of something as simple as improper lubrication. To determine if this why your blower motor hums, try lubricating the motor but don’t overdo it. Then restart the blower motor and listen.

How do I increase the airflow in my furnace?

5 Ways to Improve Airflow in Your Home

  1. Check Vents and Registers. One of the simplest things you can do to increase airflow in your home is to check the vents and registers in each room.
  2. Turn on Ceiling Fans.
  3. Schedule HVAC Maintenance.
  4. Consider Duct Cleaning.
  5. Invest in a Ventilator.

Why does my furnace make a loud noise when I turn it on?

If you hear loud noises from your furnace it could be a problem with the fan that cools down the furnace. This is caused by the fan bearings being worn out. So to be fixed the bearings will need to be replaced. If the loud noise happens only when the furnace starts to turn on then this problem is called “delayed…

Why does a dirty burner cause a furnace to explode?

Having dirty burners in your furnace can cause a delay in ignition. So the gas will build up instead of the gas igniting immediately. When the gas finally builds up enough the spark will finally ignite all that built up fuel and cause a small explosion inside your furnace. This needs to be fixed by a qualified HVAC technician.

When to call Estes services about furnace noises?

Everything mechanical makes some noise when it operates. When it comes to furnace noises, it should be fairly unnoticeable. When sudden furnace noises pop up, that’s when you need to take action. Local HVAC contractor Estes Services explains what sounds are normal from your furnace and when it’s time to call a certified technician for help.

Why does my furnace blower wheel get out of balance?

Another way the furnace blower wheel can get out of balance is if one of the balancing weights has fallen off of the blower wheel. Just remember, if the furnace is not sounding right, it’s best to call a qualified technician to inspect your HVAC system to make sure everything is in proper working order.

Posted In Q&A