What does the malfunction indicator light on a Hyundai Elantra mean?
This indicator light is part of the Engine Control System which monitors various emission control system components. If this light illuminates while driving, it indicates that a potential malfunction has been detected somewhere in the emission control system.
What to do with a 2013 Hyundai Elantra GT?
2013 Hyundai Elantra GT 1.8L 4 Cyl. Hatchback (4 Door) Change an engine fuse If you have an electrical component that doesn’t work, try replacing the fuse first 2013 Hyundai Elantra GT 1.8L 4 Cyl. Hatchback (4 Door)
What to do when your check engine light comes on?
No matter the situation, when the check engine light comes on in your Hyundai, we always suggest stopping by our service center so one of our knowledgeable technicians can properly diagnose and repair your vehicle. Our service technicians have the most up-to-date diagnostic equipment that can quickly read Hyundai OBD-II Trouble Codes.
What causes a check engine light on a Hyundai?
Fortunately AutoNation Hyundai North Richland Hills is here to help you figure out what might be wrong, and what your next steps should be. Below we have highlighted the most common causes of a check engine light. Loose Gas Cap: Your gas cap is loose, broken, or simply missing.
What causes the Check Engine light to come on in a Hyundai?
In a Hyundai, the check engine light comes on as soon as the onboard diagnostic system ( OBD ) detects that there’s an issue with the way the engine operates or Evaporative Emission Control System ( EVAP) which is used to prevent gasoline vapors from escaping into the atmosphere. A fault code stored in…
Why is the Check Engine light on in a Hyundai?
The Hyundai Tucson malfunction indicator light (MIL), often referred to a the check engine light comes on and stays on when there’s a malfunction with the emission control system. Usual causes of the check engine warning light are faulty mass airflow sensor, faulty oxygen sensor or faulty exhaust gas recirculation valve (EGR).
What do the warning lights on a Hyundai Elantra mean?
The 2018 Hyundai Elantra also includes several warning lights meant to alert you to a serious problem with your vehicle that needs immediate repairs. These lights include: Braking: The letters ABS inside of a circle means your anti-lock braking system has malfunctioned.
What does the Check Engine light on a Hyundai mean?
Learn how to diagnose Hyundai check engine light. This light means that the airbag system is not working properly. The airbags may not deploy if you get involved in an accident. Have the system diagnosed as soon as possible. Learn more about how to troubleshoot the Hyundai airbag system.
What does the malfunction indicator light tell you?
The malfunction indicator light provides you with information about the problem in two ways. The first is in the appearance of the light. If the check engine light flashes occasionally: This is a warning to have the vehicle serviced soon, and if this is ignored, it will grow into a bigger problem.
What does the ABS light mean on a Hyundai?
The vehicle can be operated with the ABS light on, but should not be driven if PARK or BRAKE light come on as well. This light means there is a problem with the electric power steering. The steering wheel may be tough to turn. This light means that oil pressure is too low.
This indicator light is part of the Engine Control System which monitors various emission control system components. If this light illuminates while driving, it indicates that a potential malfunction has been detected somewhere in the emission control system.
Is there an engine management warning light for Hyundai?
Hyundai Engine Management Warning Light Need To Diagnose – YouTube Engine light & fault reset tools here http://www.diagnostic-world.com/ Engine light & fault reset tools here http://www.diagnostic-world.com/
What does the malfunction indicator light on a car mean?
The malfunction indicator light, or check engine light, is one of these. The vehicle’s onboard computer is continuously monitoring every aspect of performance using a network of sensors, and the malfunction indicator light lets you know when these readings are indicating a major problem.
What should I do about my 2005 Hyundai Elantra?
2005 Hyundai Elantra GLS 2.0L 4 Cyl. Sedan (4 Door) Replace your air filter! Replacing a dirty air filter can improve gas mileage by up to 4%. Isn’t efficiency great? 2005 Hyundai Elantra GLS 2.0L 4 Cyl.
Can a malfunction indicator light affect fuel economy?
Generally, your vehicle will continue to be drivable, but have the system checked by an authorized HYUNDAI dealer promptly. Prolonged driving with the Malfunction Indicator Light illuminated may cause damage to the emission control systems which could effect drivability and/or fuel economy.
What does the malfunction indicator light illuminates?
The light turns on only for a reason and you should not ignore it. You should always investigate the cause. What does the Malfunction Indicator Light mean? The Malfunction Indicator Light can signal three different types of problems. Occasional flashes indicate temporary engine malfunctions.
What happens if you have a malfunction indicator light?
Prolonged driving with the Malfunction Indicator Light illuminated may cause damage to the emission control systems which could effect drivability and/or fuel economy. If the Malfunction Indicator Light illuminates or blinks, potential catalytic converter damage is possible. This could result in loss of engine power.
What happens if your emission control system malfunctions?
Prolonged driving with the Emission Control System Malfunction Indicator Light illuminated may cause damage to the emission control systems which could effect drivability or fuel economy. If the Emission Control System Malfunction Indicator Light begins to flash ON and OFF, potential catalytic converter damage is possible.
Fortunately AutoNation Hyundai North Richland Hills is here to help you figure out what might be wrong, and what your next steps should be. Below we have highlighted the most common causes of a check engine light. Loose Gas Cap: Your gas cap is loose, broken, or simply missing.
Why does my Hyundai Elantra have a p0440 code?
Evap System Hose – The hose that carries the fuel vapor from the fuel tank to the intake manifold may leak. This will cause the P0440 code. Look for either a tear or hole in it. This is one of the most common issues that causes the code.
Is the tail light on a 2013 Hyundai Elantra GT?
2013 Hyundai Elantra GT 1.8L 4 Cyl. Hatchback (4 Door) Change a tail light The burnt out tail light: classic reason for a cop to pull you over – change yours now 2013 Hyundai Elantra GT 1.8L 4 Cyl. Hatchback (4 Door)
When does the malfunction indicator light go out?
If this light illuminates while driving, it indicates that a potential malfunction has been detected somewhere in the emission control system. This light will also illuminate when the ignition switch is turned to the ON position, and will go out in a few seconds after the engine is started.
What does a malfunction check engine light mean?
Malfunction Indicator Lamp/Check Engine Light If this indicator comes on while driving, there is a problem with your engine or its emission control systems. Even though you may feel no difference in your car’s per- formance, it can reduce your fuel economy and cause your car to put out excessive emissions.
2013 Hyundai Elantra GT 1.8L 4 Cyl. Hatchback (4 Door) Change a tail light The burnt out tail light: classic reason for a cop to pull you over – change yours now 2013 Hyundai Elantra GT 1.8L 4 Cyl. Hatchback (4 Door)
If this light illuminates while driving, it indicates that a potential malfunction has been detected somewhere in the emission control system. This light will also illuminate when the ignition switch is turned to the ON position, and will go out in a few seconds after the engine is started.
When does the OBD2 indicator light turn on?
The OBD2 system illuminates the light when there is a problem with the car’s engine, transmission or emission control system. The light turns on only for a reason and you should not ignore it. You should always investigate the cause.
What to do if your Hyundai Veloster warning light does not turn off?
1.Park the vehicle in a safe place and turn off the engine. 2.Turn on the engine again. 3.If the warning light illuminates and turns off in approximately 3 seconds, the system is operating normally. If the warning light does not turn off, have your vehicle checked by an authorized HYUNDAI dealer as soon as possible.
When does a Hyundai Veloster oil pressure indicator come on?
Your dealer should be consulted for repairs. This indicator illuminates when the headlights are on and in the high beam position or when the turn signal lever is pulled into the Flash-to-Pass position. This indicator illuminates when the tail lights are on. This warning light indicates the engine oil pressure is low.
Why is my Check Engine light on in my Hyundai?
If your check engine light comes on in your Hyundai, you probably want to know why. The reason this warning is so dreaded by drivers is because it presents only a vague idea of why the light actually turned on. Thankfully, we’re here to help you out.
What is the problem with Hyundai Elantra stability control system?
The Problem: A malfunctioning yaw sensor for the electronic stability control system can cause the application of one or more of the brakes and cut power to the engine, as well as the illumination of the ESC indicator light. Injuries/Deaths: None reported. The Fix: Dealers will check the ESC sensors and update the ESC calibration free of charge.
Is there a recall on the 2012 Hyundai Elantra?
Hyundai’s number for this recall is 137. Hyundai Motor America (Hyundai) is recalling certain 2011-2012 Hyundai Elantra and Sonata Hybrid, 2012 Accent and Veloster vehicles.
What does the malfunction indicator light ( Mil ) mean?
People usually get interested in the On-Board Diagnostics when the Malfunction Indicator Light illuminates on the dashboard of their cars. The Malfunction Indicator Light (MIL) is also known as the Check Engine Light. The purpose of this warning light is to indicate a detected problem with…
When to turn off the malfunction indicator light?
The DTC will give information about the detected issue. The OBD2 system can turn the MIL off automatically if the conditions for the problem stop to exist. After evaluating a system or component for three consecutive times without detecting the problem, the light can be turned off. But, usually the light remains on. What are the next steps?
People usually get interested in the On-Board Diagnostics when the Malfunction Indicator Light illuminates on the dashboard of their cars. The Malfunction Indicator Light (MIL) is also known as the Check Engine Light. The purpose of this warning light is to indicate a detected problem with…
The DTC will give information about the detected issue. The OBD2 system can turn the MIL off automatically if the conditions for the problem stop to exist. After evaluating a system or component for three consecutive times without detecting the problem, the light can be turned off. But, usually the light remains on. What are the next steps?
When does the Check Engine light go out?
In other words, it may require OEM scanner or a dealer scan tool to read the enhanced codes. The OBD II Check Engine light will remain on as long as a fault persists. If an intermittent fault does not reoccur after three consecutive trips, the Malfunction Indicator Light (MIL lamp) will go out but the code will remain in memory.