How do you do a parting line in Solidworks?
To create a parting line:
- Click Parting Lines (Mold Tools toolbar) or Insert > Molds > Parting Line.
- In the Parting Line PropertyManager, set options, then click .
What is parting line draft solidworks?
You can draft surfaces around a parting line. Then you specify the direction of pull, or the side of the parting line from which material is removed. You can check the draft angles on your model using the draft analysis tool.
What is the use of parting line?
A parting line, in industrial casting of molds, is the border line in which draft angles change direction. One can check the parting line in the mould or product which divides the two half, i.e; the core and the cavity of a molded part. It is sometimes a starting point for the mold parting surface.
What is a parting surface solidworks?
Parting surfaces are used to separate the mold cavity from the core. Contents. Creating a Parting Surface. You can create a parting surface, which is extruded from parting lines, to separate the mold cavity from the core. You must create a parting surface to create a tooling split.
What does split line do in Solidworks?
The SOLIDWORKS Split Line tool is used to project an entity (sketch, solid, surface, face, plane, or surface spline) onto other surfaces or curved/planar faces. You are also able to split faces on multiple bodies with one command.
How do you choose a parting line for casting?
The first step for determining parting line is to select an appropriate parting direction. One set of alternatives for the parting direction is generally provided by the centrelines of the minimal bounding box of the casting. Other alternatives are given by the direction of normal to large faces in the casting.
What is the line of draft?
A draft line is a collection of features used to create tangent draft for parts with complex geometry. A draft line consists of any draft curves, parting curves, and datum curves used to create the draft.
What is a step draft?
A step draft is a variation of a parting line draft. The step draft creates one face rotated about the plane used as the Direction of Pull. At least one parting line segment is coincident to the parting plane on each draft face. All other parting line segments are in the pull direction of the plane.
Where do you place a parting line?
On some parts, the location for the parting line is obviously right down the middle, while on more complex parts, it may not be as obvious. Take, for example, a simple plastic cup. The outer face is formed by one mold half (A-side), while the cup’s inner surface and brim will be formed by the other mold half (B-side).
What is the difference between parting line and parting surface?
Parting Line and Parting Surface It is a line that splits the mold into two parts – the core and the cavity. A parting surface is a surface that separates the mold block into two parts – the core and the cavity.
Where are the parting lines in SolidWorks molds?
SOLIDWORKS Help. Parting lines lie along the edge of the molded part, between the core and the cavity surfaces. They are used to create the parting surfaces, and to separate the surfaces. You create the parting lines after the model is scaled and proper draft is applied.
How do you split a face in SolidWorks?
Multiple parting line features in a single part. Partial parting line features. You can automatically split straddle faces found during draft analysis, either along the +/- boundary or at a specified draft angle. You can also split a face by selecting a sketch segment, a pair of vertices, or a spline on a surface.
Can a parting line be used in a step draft?
The parting line option lets you draft surfaces around a parting line. The parting line can be non-planar. In a draft using a parting line, you can also include a Step draft. To draft on a parting line, you can first divide the faces to be drafted by inserting a split line, or you can use an existing model edge.
How do you draft a line in SolidWorks?
Click Draft on the Features toolbar or click . Under Type of Draft, select Parting Line. Under some conditions, select the Allow reduced angle check box. Under Draft Angle, enter the Draft angle . Under Direction of Pull, select an edge or face in the graphics area to indicate the direction of pull.