How to repair the timing chain on a Hyundai Sonata?
1. Remove the engine cover. 2. Disconnect the battery negative terminal (A). 3. Remove the air duct (B). 4. Remove the air cleaner assembly. Disconnect the breather hose (A), the intensifier hose (B) and the brake booster vacuum hose (C). Disconnect the air intake hose (D) and then remove the air cleaner assembly (E). 5. Remove the RH front wheel.
How to tighten balance shaft on Hyundai Santa Fe?
Tighten the bolts in order number as shown with seating torque 26.4 N.m (3.0kgf.m, 21.7 lb-ft) and then loosen the bolts as reverse tightening order. (6-5-4-3-2-1). Using the SST (09221-4A000), tighten the bolts as specified tightening order in same increments as follows. 4. Install the balance shaft chain guide (D). 5.
What should I do if my Hyundai Sonata stops?
Mark all wiring and hoses to avoid misconnection. In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be injury caused by leakage of the high pressure fuel. So don’t do any repair work right after engine stops.
How to install balance shaft and oil pump?
Install the balance shaft & oil pump module (A) with the chain (B) and the sprocket (C). The timing marks of balance shaft & oil pump module sprocket and crankshaft sprocket should be matched with the timing marks (color link) of balance shaft chain.
1. Remove the engine cover. 2. Disconnect the battery negative terminal (A). 3. Remove the air duct (B). 4. Remove the air cleaner assembly. Disconnect the breather hose (A), the intensifier hose (B) and the brake booster vacuum hose (C). Disconnect the air intake hose (D) and then remove the air cleaner assembly (E). 5. Remove the RH front wheel.
Mark all wiring and hoses to avoid misconnection. In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be injury caused by leakage of the high pressure fuel. So don’t do any repair work right after engine stops.
How do you install the ring gear on a Hyundai Sonata?
There are two methods to hold the ring gear when installing or removing the crankshaft damper pulley. Install the SST (09231-3K000) to hold the ring gear after removing the starter. Install the SST (09231-3D100) to hold the ring gear after removing the dust cover. 1.
How to fix timing chain on Kia Sportage?
Insert the SST between the oil pan and the ladder frame by tapping it with a plastic hammer in the direction of arrow. After tapping the SST with a plastic hammer along the direction of arrow around more than 2/3 edge of the oil pan, remove it from the ladder frame. Do not turn over the SST abruptly without tapping.
There are two methods to hold the ring gear when installing or removing the crankshaft damper pulley. Install the SST (09231-3K000) to hold the ring gear after removing the starter. Install the SST (09231-3D100) to hold the ring gear after removing the dust cover. 1.
How do you change timing belt on Hyundai Tiburon?
Engine removal is not required for this procedure. 1. Remove the engine cover. 2. Remove RH front wheel. 3. Remove 2bolts (B) and RH side cover (A). 4. Turn the crankshaft pulley, and align its groove with timing mark “T”of the timing belt cover.
Engine removal is not required for this procedure. 1. Remove the engine cover. 2. Remove RH front wheel. 3. Remove 2bolts (B) and RH side cover (A). 4. Turn the crankshaft pulley, and align its groove with timing mark “T”of the timing belt cover.
Insert the SST between the oil pan and the ladder frame by tapping it with a plastic hammer in the direction of arrow. After tapping the SST with a plastic hammer along the direction of arrow around more than 2/3 edge of the oil pan, remove it from the ladder frame. Do not turn over the SST abruptly without tapping.
What’s the best way to replace a timing belt?
With all the timing marks lined up, route the new belt around the largest diameters first, leaving the smallest pulley or sprocket for last. It’s tricky to slip the new, stiffer belt over that last one, but you’ll get it after a couple of different wiggling, jiggling attempts.
What does the timing belt do on an OHC engine?
The timing belt (or chain) is the sole component that keeps the camshaft (make that camshafts on a DOHC or V-type OHC engine) and crankshaft in sync.
What is the recommended maintenance schedule for a Hyundai?
Hyundai Motor America provides electronic recommended maintenance schedules for all 2000 model year and newer vehicles. As the owner of a Hyundai vehicle, please ensure that each recommended maintenance service is performed at the prescribed interval.
How often should I change the oil in my Hyundai Sonata?
*3 Engine oil (2.0 TGDI) At first, replace at 3,000 miles (5,000 km) or 6 months, after that, every 5,000 miles (8,000 km) or 6 months. *4 If TOP TIER Detergent Gasoline is not available, one bottle of additive is recommended. Additives are available from your authorized HYUNDAI dealer along with information on how to use them.
How old is the timing belt on my Hyundai?
On a recent visit to my local Hyundai dealer it was suggested that the timing belt (among other things) be replaced. The issue is that although the car is 9 years old it only has 35,000 miles and has been lightly used.
When to follow the normal Hyundai Sonata maintenance schedule?
Follow Normal Maintenance Schedule if the vehicle is usually operated where none of the following conditions apply. If any of the following conditions apply, follow Maintenance Under Severe Usage …
What’s the problem with my 2006 Hyundai Sonata?
I have a 2006 Hyundai Sonata and the cigarette lighter and all the other ports like the one in the trunk and etc, none of them are working, can you please tell me whats going on? Rear doors on 2006 sonata won’t unlock with fob or key. Can’t open from inside either.
How does the CVVT work on a Hyundai?
P0011 Hyundai Description The CVVT (Continuously Variable Valve Timing) system is installed to the chain sprocket of the exhaust camshaft. There is no variation in valve timing of the exhaust cam because the exhaust camshaft is driven by the timing belt. The timing of the intake cam is varied by the relative operation the CVVT vane to the housing.
Is the Hyundai Sonata 6 cylinders or 4?
Hyundai Sonata 6 cylinders or 4? Retired….. City/highway driving is 50-50….. Only about 5000 miles/year. Am seriously considering buying an ’07 Sonata. And believe the 4 cyc. should give me enough power. Can anyone give me a good reason why I should really consider the 6 cyc. over the 4. Cost is not a problem.
Are there any manuals for the Hyundai Sonata?
In the table below you can see 0 Sonata Workshop Manuals,0 Sonata Owners Manuals and 18 Miscellaneous Hyundai Sonata downloads. Our most popular manual is the Hyundai Sonata Workshop Manual (V6-3.3L (2006)) . This (like all of our manuals) is available to download for free in PDF format.
Can you find a 07 Sonata GLS with a 5-speed?
Good luck finding a ’07 Sonata GLS with a 5-speed–they are quite rare. Who are you really?. You are the stealth poster. :confuse: The 6 Cyl models cost less than the 4 cyl models after rebate. The resale value is higher. The growl of the 235 Horsepower (234 for 07) engine is awesome Well backy he was talking about purchase of the I-4.
How to remove and install the serpentine belt?
This post covers removing and installing the serpentine belt on a 2011 2.4 Hyundai Sonata. If a serpentine wrench will fit in the limited space available on this engine that would be the preferred way to do this job.
When do I need to replace my timing belt?
If your engine is of the interference type, it is especially important to replace the belt according to the maintenance schedule because sudden breakage of the timing belt, while the engine is running, will likely cause significant damage to internal engine components such as the valves and pistons.
Does a Hyundai Sonata have a timing belt or timing chain?
2005 Hyundai Sonata – Timing Belt Or Chain All 2005 Hyundai Sonata engines have a timing belt and are non-interference. Note: The 2005 Sonata 2.4L 4 cylinder engines also have a balance shaft belt that needs to be changed at the same interval as the timing belt. 2004 Hyundai Sonata – Timing Belt Or Chain
When to replace timing belt on Hyundai Tucson?
Photo 1: Hyundai schedules a timing belt replacement at 58,000-mile or 72-month intervals on its 2009 2.7L DOHC V6 Tucson engines. Like it or not, modern technology dictates how the modern independent import repair shop does business.
When to replace timing chain in Hyundai 3.3L?
If it’s any indication of reliability, Hyundai’s 3.3L maintenance schedule extends to 367,000 miles with no recommendation for a routine timing chain replacement (see Photo 2). WHY CVVT?
What kind of chains are in a Hyundai Sonata?
Photo 2: Hyundai’s 3.3L DOHC engine found in the 2007 Sonata incorporates two chains to drive the camshafts and one chain to drive the oil pump. None have scheduled replacement intervals.
How much does it cost to replace timing belt on Hyundai Sonata?
Upfront and transparent pricing. Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM. Hyundai Sonata Timing Belt Replacement costs $622 on average. What is a timing belt and how does it work?
When to replace timing belt on Acura RDX?
The timing belt system includes idler pulleys and a belt tensioner. These components should be replaced along with the belt. On some cars, the timing belt drives the engine’s water pump. Mechanics will usually recommend replacing the water pump at the same time that the timing belt is replaced.
If your engine is of the interference type, it is especially important to replace the belt according to the maintenance schedule because sudden breakage of the timing belt, while the engine is running, will likely cause significant damage to internal engine components such as the valves and pistons.
Why does my timing belt keep jumping gears?
Rough engine operation. The molded, reinforced teeth on the timing belt engage gears on the crankshaft and camshafts. After many tens of thousands of miles, the teeth can wear or break, or the belt can stretch, thus causing the belt to jump position on the crankshaft or camshaft gears.