Where can I get new PTO clutches for my riding mower?
MowerClutches.com provides new replacement PTO Clutches for all the major manufacturers such as Exmark, Ariens, Gravely, Craftsman, Honda, Husqvarna, John Deere, MTD, Snapper and Toro. Please don’t hesitate to contact us if you need help finding the correct replacement part for your mower.
What should I do if my Honda lawn mower is not working?
If adjustment is required, loosen the top and bottom drive clutch cable lock nuts with a 10 mm wrench. Move the adjuster up or down, as required, until the mower operates as outlined in step 4. Tighten the lock nuts. If the mower will not operate correctly, take the mower to an authorized Honda servicing dealer.
How can I get my Honda lawn mower to self propel?
Start the engine and move the throttle lever to the FAST position. Engage the drive clutch lever and confirm the following: Mower does not self-propel. Mower begins to self-propel or creeps very slowly forward when the shift lever is moved one notch forward.
How do you tighten wheel resistance on Honda lawn mower?
If no wheel resistance exists, mark the adjuster and TIGHTEN the adjuster one turn at a time until the wheels lock-up when pulling rearward. Turn the adjuster in the LOOSEN direction 8 complete revolutions (for K8 and later; MZCG-8400001 and later). For K5 through K7, do 4 complete revolutions. Tighten the jam nut to lock the adjuster in place.
Start the engine and move the throttle lever to the FAST position. Engage the drive clutch lever and confirm the following: Mower does not self-propel. Mower begins to self-propel or creeps very slowly forward when the shift lever is moved one notch forward.
What should I do if my Honda lawn mower does not lock up?
The rear wheels should lock up before the Smart Drive paddles are straight up-and-down. If they don’t, perform the cable adjustment below. With the engine off, loosen the jam nut one revolution. Without pushing the Smart Drive control, pull the lawn mower backwards to check wheel resistance.
If no wheel resistance exists, mark the adjuster and TIGHTEN the adjuster one turn at a time until the wheels lock-up when pulling rearward. Turn the adjuster in the LOOSEN direction 8 complete revolutions (for K8 and later; MZCG-8400001 and later). For K5 through K7, do 4 complete revolutions. Tighten the jam nut to lock the adjuster in place.
How do you adjust Smart Drive on Honda lawn mower?
With the engine off, use the multi-position adjuster to set the Smart Drive control in its lowest position. Gradually push the Smart Drive control down while pulling the lawn mower backwards. The rear wheels should lock up before the Smart Drive paddles are straight up-and-down. If they don’t, perform the cable adjustment below.